ZyXEL Communications P-1100 Front Panel LEDs and Back Panel Ports, Dhcp Support, Data Compression

Prestige 1100 Internet Access Router

DHCP Support

DHCP (Dynamic Host Configuration Protocol) allows you to dynamically and automatically assign IP address to hosts on your network.

Data Compression

Your Prestige incorporates Stac data compression to speed up data transfer. Stac is the de facto standard of data compression over PPP links.

1.3Front Panel LEDs and Back Panel Ports

Figure 1-2 Prestige 1100 Front Panel

1.3.1 Front Panel LEDs

The LED lights on the front panel indicate the operational status of your Prestige. Table 1-1 (next) describes the LED functions:

PWR

SYS

Table 1-1 LED Functions

The PWR (power) LED is on when power is applied to the Prestige.

A steady on SYS (system) LED indicates the Prestige is on and functioning properly while an off SYS LED indicates the system is not ready or a malfunction. The system is rebooting when the SYS LED is blinking.

LAN-1_10M	A steady green light indicates a 10Mbps Ethernet connection. The LED blinks when data is being sent
	or received.
LAN-1_100M	A steady orange light indicates a 100Mbps Ethernet Connection. The LED blinks when data is being
	sent or received.
LAN-2_10M	A steady green light indicates a 10Mbps Ethernet connection. The LED blinks when data is being sent
	or received.
LAN-2_100M	A steady orange light indicates a 100Mbps Ethernet Connection. The LED blinks when data is being
	sent or received.

WAN

The WAN LED is on when the Prestige is connected successfully to a WAN device. The LED blinks when data is sent or received. The LED is off when the link is down.

Getting to know your Prestige 1-3