ZyXEL Communications P-1100 manual Navigating the SMT Interface, Main Menu Commands

Prestige 1100 Internet Access Router

2.5Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.

Several operations that you should be familiar with before you attempt to modify the configuration are listed in Table 2-1.

		Table 2-1 Main Menu Commands
Operation	Press/<read>	Description
Move forward to	[ENTER]	To move forward to a sub-menu, type in the number of the desired
another menu		sub-menu and press [ENTER].
Move backward to	[ESC]	Press the [ENTER] key to move back to the previous menu.
a previous menu
Move to a “hidden”	Press the	Fields beginning with “Edit” lead to hidden menus and have a default
menu	[Space bar] to	setting of [No]. Press the [Space bar] to change [No] to [Yes], then
	change [No] to	press [ENTER] to go to a “hidden” menu.
	[Yes] then
	press
	[ENTER].
Move the cursor	[ENTER] or	Within a menu, press [ENTER] to move to the next field. You can
	[Up]/[Down]	also use the [Up]/[Down] arrow keys to move to the previous and the
		next field, respectively.
	arrow keys
Enter information	Fill in, or	There are two types of fields that you will need to fill in. The first
	Press the	requires you to type in the appropriate information. The second gives
		you choices to choose from. In the second case, press the [Space
	[Space bar] to
		bar] to cycle through the available choices.
	toggle
Required fields	<?>	All fields with the symbol <?> must be filled in order be able to save
		the new configuration.
N/A fields	<N/A>	Some of the fields in the SMT will show a <N/A>. This symbol refers
		to an option that is not available.
Save your	[ENTER]	Save your configuration by pressing [ENTER] at the message:
configuration		[Press ENTER to confirm or ESC to cancel]. Saving the data on the
		screen will take you, in most cases to the previous menu.
Exit the SMT	Type 99, then	Type 99 at the Main Menu prompt and press [ENTER] to exit the
	press	SMT interface.
	[ENTER].

Hardware Installation & Initial Setup 2-5