ZyXEL Communications P-1100 manual Novell IPX Ethernet Setup Fields

Prestige 1100 Internet Access Router

6.3IPX Ethernet Setup

From Menu 3 - Ethernet. Setup, select option 3. Novell IPX Setup from the appropriate LAN to go to Menu 3.3 - Novell IPX Ethernet Setup as shown in Figure 6-3.

Menu 3.3 - Novell IPX Ethernet Setup

Seed Router= No

Frame Type 802.2= Yes

IPX Network #= N/A

Frame Type 802.3= No

IPX Network #= N/A

Frame Type Ethernet II= No

IPX Network #= N/A

Frame Type SNAP= No

IPX Network #= N/A

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup

The following Table 6-1 describes the Novell IPX Ethernet Setup Menu.

Table 6-1 Novell IPX Ethernet Setup Fields

Field	Description	Options
Seed Router	Determine if your Prestige 1100 is to act as a seed router.	[Yes/No]
Frame Type	Enable/Disable the individual frame type. Remember to enable only	[802.2]
	the ones that are actually used on your network.	[802.3]
		[Ethernet II]
		[SNAP]
IPX Network	If your Prestige 1100 is a seed router, enter a unique network number
#	for each frame type enabled.

Press [ENTER] at the message [Press ENTER to Confirm] to save your configuration, or press [ESC] at any time to cancel.

6-4 IPX Configuration