Prestige 1100 Internet Access Router

13.2 Applying an IP Policy

This section shows you where to apply the IP Policies after you design them.

13.2.1Ethernet IP Policies

From Menu 3 - Ethernet Setup, enter 2 to go to Menu 3.2 -General Ethernet Setup.

You can choose up to four IP Policy sets (from twelve) by entering their numbers separated by commas, e.g., 2, 4, 7, 9.

Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP Setup:

DHCP= None

Client IP Pool Starting Address= N/A

Size of Client IP Pool= N/A

Primary DNS Server= N/A

Secondary DNS Server= N/A

TCP/IP Setup:

IP Address= 192.68.0.1

IP Subnet Mask= 255.255.255.0

RIP Direction= Both

Version= RIP-2B

Multicast = IGMP-v2

IP Policies= 2,4,7,9

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 13-4 Menu 3.1.1 - General Ethernet Setup

13.2.2Remote Node IP Routing Policies

Enter your IP Policy sets here.

Go to Menu 11.3 (shown next) and enter the number(s) of the IP Routing Policy set(s) as appropriate. You can cascade up to four policy sets by entering their numbers separated by commas.

13-6

IP Policy Routing

Page 120
Image 120
ZyXEL Communications P-1100 manual Applying an IP Policy, Ethernet IP Policies, Remote Node IP Routing Policies