Connection & |
| |
1 | Plug your UPS's Line |
|
| Cord into an electrical |
|
| outlet. |
|
| If your model features a detachable line cord, |
|
| first plug the female end into your UPS’s AC |
|
| Input Receptacle. |
|
| Your UPS must be connected to a dedicated |
|
| circuit of sufficient |
|
| “Recommended Utility Amps” rating of your | SU2200RT2U Plug (NEMA |
| model in the specifications. Note, however, | |
| that the select models may be fitted with differ- |
|
| ent plug types. Refer to the “OP Rating/Plug |
|
| Rating” chart printed on the top of your UPS. |
|
Once your UPS is plugged in, the fan and all Indicator Lights will turn ON. The “LINE” and “LOAD ACTIVE METER” LEDs will illuminate and the UPS will emit a beep to indicate nor- mal operation. However, power is not supplied to your UPS's AC outlets until the UPS is turned on.
2 Plug your equipment into your UPS.
Your UPS is designed to support computer equipment only. You will overload your UPS if you connect household appliances or laser printers to the UPS's outlets.
SU2200RT2U Shown
3 Turn your UPS ON:
• Press the “ON/TEST” Switch
• Hold it for several seconds until you hear a beep
• Release it
Your UPS will begin providing AC power to its outlets. The "ON LINE" LED will illuminate.
4
