Optional Connections
Your UPS will function properly without these connections.
Serial Port Connection
Using the serial cable provided, connect a seri- al port on your computer to the serial port of your UPS. Install Tripp Lite's PowerAlert soft- ware (provided on CD) on the computer .
External Battery Pack Connection
Check to ensure that the external batteries you are connecting match the voltage listed on your UPS’s battery connector. Plug either end of the battery connection cable (supplied with the bat- tery pack) into the UPS’s External Battery Connector and the other end into the Battery Output Connector on the rear panel of the external battery pack.
Since your UPS has internal batteries, external batteries are only needed to extend runtime. Adding external batteries will increase recharge time as well as runtime. Make sure that each end of the cable is fully inserted into its con- nector. Several small sparks may result during battery connection; this is normal.
SU2200RT2U Shown
SU2200RT2U Shown
5
