Storage & Service
Storage
Before storing your UPS, turn it completely OFF: with the UPS ON and receiving utility power, press and hold the POWER button for one second (an alarm will beep once briefly after the interval has passed); then, unplug the UPS from the wall outlet. If you store your UPS for an extended period of time, recharge the UPS batteries once every three months: plug the UPS into a wall outlet; allow it to charge for 4 to 6 hours; and then unplug it and place it back in storage. Note: after you plug the UPS in, it will automatically begin charging its batteries; however, it will not supply power to its outlets (see Quick Installation section). If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.
Service
Before returning your UPS for service, follow these steps:
1.Review the installation and operation instructions in this manual to ensure that the service problem does not originate from a misreading of the instructions. Also, check that the UPS System's circuit breaker(s) are not tripped. This is the most common cause of service inquiries which can be easily remedied by following the resetting instructions in this manual.
2.If the problem continues, do not contact or return the UPS to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service technician will ask for the UPS's model number, serial number and purchase date and will attempt to correct the problem over the phone.
3.If the problem requires service, the technician will issue you a Returned Material Authorization (RMA) number, which is required for service. If you require packaging, the technician can arrange to send you proper packaging. Securely pack the UPS to avoid damage during shipping. Do not use Styrofoam beads for packaging. Any damages (direct, indirect, special, incidental or consequential) to the UPS incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. UPS Systems shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the outside of the package. If the UPS System is within the 2-year warranty period, enclose a copy of your sales receipt. Return the UPS for service using an insured carrier to the address given to you by the Tripp Lite service technician.
Specifications
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Model: | SMART2200VS | SMART2200VSXL | SMART3000VS |
Series #: | AGSM2200MJR31 | AGSM2200XMJR31 | AGSM3000MJR31 |
Input | | | |
Nominal Voltage/Frequency: | 120VAC/60 Hz | 120VAC/60 Hz | 120VAC/60 Hz |
Recommended Dedicated Electrical Circuit: | 20 amp or 15 amp* | 20 amp | 30 amp or 20 amp* |
Output | | | |
Capacity (VA/Watts): | 2200/1600 | 2200/1600 | 3000/2250 |
On Line Nominal Voltage/Waveform: | 120VAC/sine wave | 120VAC/sine wave | 120VAC/sine wave |
On Battery Nominal Voltage/Waveform: | 115VAC/PWM sine wave | 115VAC/PWM sine wave | 115VAC/PWM sine wave |
Battery Runtime (Half Load/Full Load) Minutes: | 19/7 | 19/7+ | 14/4+ |
Battery Recharge Time: | 2 - 4 hrs. | 2 - 4 hrs. | 2 - 4 hrs. |
FCC: | Class A | Class A | Class A |
Approvals: | UL, cUL, NOM | UL, cUL, NOM | UL, cUL, NOM |
ALL UNITS: Voltage-Regulated Output Voltage Range: -18% / +8%. On-Battery Output Voltage Range: ± 5 %. AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB at 1MHz); AC Protection Modes (H to N, H to G, N to G).
+Battery runtime can be extended with addition of optional Tripp Lite External Battery Packs (sold separately). SMART2200VSXL and SMART3000VS models use BP48V18 battery packs. External batteries will increase both the battery runtime and the battery recharge time.
* Since these models include two plug options, the amperage of the recommended circuit would change to match the amperage of the plug. SMART2200VS models features a 20-amp NEMA 5-20P plug attached to its line cord, but includes a 15-amp NEMA 5-15P plug loose in the box that can be attached to the line cord by a qualified electrician. SMART3000VS features a 30-amp twist-lock NEMA L5-30P plug attached to its line cord, but includes a 20-amp NEMA 5-20P plug loose in the box that can be attached to the line cord by a qualified electrician.
FCC RADIO/TV INTERFERENCE NOTICE: Note: This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. Operation of this equipment is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The user must use shielded cables and connectors with this product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note on Labeling
Two symbols are used on the label.
V~ : AC Voltage
V
: DC Voltage
10
Manual del propietario
Sistemas UPS SmartPro® VS
Inteligentes e interactivos con la línea (Para montaje en torre)
•Entrada de 120 V • Capacidad entre 2200 y 3000VA
•Opción de tiempo de respaldo extendido
UL 1778
Instrucciones de seguridad importantes | 12 |
| |
| |
Instalación rápida | 13 |
| |
| |
Instalación opcional | 14 |
| |
| |
Operación básica | 15 |
| |
| |
Almacenamiento y servicio | 20 |
| |
| |
Especificaciones | 20 |
| |
| |
English | 1 |
| |
| |
Français | 20 |
| |
1111 W. 35th Street Chicago, IL 60609 USA
Soporte al cliente: (773) 869-1234 • www.tripplite.com
Copyright ©2003 Tripp Lite. Todos los derechos reservados. SmartPro® es una marca comercial registrada de Tripp Lite.
