MODELS 643C, 643B & 645A
REF | PART NO. | DESCRIPTION | REF | PART NO. | DESCRIPTION | |
NO. | NO. | |||||
|
|
|
| |||
|
|
|
|
|
| |
1 | Tine Hood Assembly (A) | 27 | Spring, Forward Clutch | |||
| Tine Hood Assembly (B) (C) | 28 | Cable Assembly, Forward Clutch | |||
2 | Hex Screw, | 29 | Cable Assembly, Reverse Clutch (B) (C) | |||
3 | Hex Hd. Screw, | 30 | Bail, Forward Clutch | |||
4 | Screw, | 31 | Upper Handlebar | |||
5 | Hex Hd. Screw, | 32 | Lower Handlebar | |||
6 | Hex Hd. Screw, | 33 | Tab, Conduit Mount | |||
7 | Hex Lock Nut, Nylon, | 34 | Bracket, Reverse Clutch Cable (B) (C) | |||
8 | Hex Lock Nut, Nylon, | 35 | Handlebar Support | |||
9 | Spirol Pin | 36 | Panel | |||
10 | Spring, Depth Regulator | 37 | Screw, Hex, | |||
11 | Flat Washer, 5/16 | 38 | Screw, Hex, | |||
12 | Spacer, .462 x .328 x 1.63 | 39 | Hex Lock Nut, | |||
13 | Bushing | 40 | Lock Washer, 5/16 | |||
14 | Spacer | 41 | Cable Tie | |||
15 | Reverse Stop Arm | 42 | Flat Washer, 3/8 | |||
16 | Channel Support Bracket | 43 | Flange Lock Nut | |||
17 | Drag Bar | 44 | Hex Hd. Screw, | |||
18 | Flap Stop Bracket | 45 | Hex Hd. Screw, | |||
19 | Hood Bracket, Left Hand | 46 | Flange | |||
20 | Hood Bracket, Right Hand | 47 | Single Bolo Tine - Left Hand | |||
21 | Adjustable Depth Bar | 48 | Single Bolo Tine - Right Hand | |||
22 | Hex Hd. Screw, | 49 | Tine Holder (A) | |||
23 | Screw, |
| Tine Holder (B) (C) | |||
24 | Hex Lock Nut, |
| Bolo Tine Replacement Set (Incl. eight | |||
25 | Hex Nut, |
|
| |||
26 | Hex Lock Nut, |
|
| required hardware). (A) (B) (C) | ||
|
|
|
|
|
|
(A)For Model 643C
(B)For Model 643B
(C)For Model 645A
25