IMPORTANT: Make sure to insert the z-fitting into the rear hole as it was inserted in the front hole, that is from the outside of the drive control.

3.You may now carefully reinstall the drive control by performing the previous steps in the opposite order and manner of removal.

IMPORTANT: Once assembled and prior to restarting, make sure that the cable is properly adjusted. With the drive control disengaged, the unit should freely pull in reverse.

WARNING: Before performing any type of maintenance on the machine, wait for all parts to stop moving and disconnect

the spark plug wire. Failure to follow this instruction could result in personal injury or property damage.

Removing the Flail Screen

If the discharge area becomes clogged, remove the flail screen and clean area as follows:

1.Stop the engine. Make certain the chipper/shredder vacuum has come to a complete stop.

2.Before unclogging the discharge chute, disconnect and ground the spark plug wire to retaining post.

3.Remove the vacuum bag from the unit as instructed in the OPERATION section to obtain access to flail screen.

4.Remove the three self tapping screws securing the belt cover, and remove belt cover. See Figure 5-2.

5.Remove self tapping screw on right side of unit that attaches to the flail screen. It may be necessary to remove the hose bracket hanger to get access to the screw. See Figure 5-3.

6.Remove hex screw on top of rear housing near mounting bracket and the flange lock nut that secures flail screen. See Figure 5-3.

7.Remove and clean the screen by scraping or wash- ing with water. See Figure 5-4.

8.Reinstall the screen.

Figure 5-2

Figure 5-3

Figure 5-4

5

Maintaining

Your

Chipper

Shredder

Vacuum

WARNING

Before perform- ing any type of maintenance on the machine, wait for all parts to stop moving and disconnect the spark plug wire. Failure to follow this instruction could result in personal injury or property damage.

15

Page 14 Page 16
Page 15
Image 15
Troy-Bilt 70 warranty Removing the Flail Screen
Page 14 Page 16

70 specifications

The Troy-Bilt 70 is a powerful and versatile garden tiller designed to meet the needs of both amateur gardeners and seasoned horticulturists. Renowned for its durability and user-friendliness, the Troy-Bilt 70 boasts a range of features that simplify soil preparation and enhance garden productivity.

One of the standout characteristics of the Troy-Bilt 70 is its robust engine. Featuring a reliable and efficient 196cc engine, this tiller delivers ample power to tackle tough soil conditions, making it suitable for a variety of tasks ranging from breaking new ground to cultivating established gardens. The engine is designed for easy starting and low maintenance, ensuring that users can get to work without hassle.

The tiller's counter-rotating tines are another key feature that sets the Troy-Bilt 70 apart from its competitors. These tines rotate in the opposite direction to the travel of the tiller, allowing for deeper soil penetration and improved soil mixing. This technology helps to break up compacted soils more effectively, ensuring that nutrients and moisture are evenly distributed throughout the garden bed.

The tiller also comes equipped with a 12-inch tilling width, allowing users to cover more ground quickly while still maintaining control. The adjustable tilling depth feature enables gardeners to customize the depth according to their specific planting needs, ensuring optimal results for a variety of crops.

Comfort is a priority in the design of the Troy-Bilt 70. The machine features ergonomic handles that reduce user fatigue during extended use. Additionally, the quick-adjust depth control allows for seamless transitions between different tilling tasks. The user-friendly design ensures that even those new to tilling can operate the machine with confidence.

Furthermore, the construct of the Troy-Bilt 70 emphasizes durability. Built with high-quality materials, this tiller can withstand the rigors of regular use in challenging outdoor environments. The innovative design also makes storage easy, with a foldable handle for compact storage options.

In conclusion, the Troy-Bilt 70 is a reliable and efficient gardening tool that combines power, versatility, and comfort. With its sturdy engine, counter-rotating tines, adjustable tilling depth, and ergonomic design, it offers a comprehensive solution for all tilling needs. Whether preparing a new garden plot or maintaining an existing garden, the Troy-Bilt 70 proves to be an indispensable asset for any gardening enthusiast.
Top Page Image Contents