Troy-Bilt 70 warranty Attaching The Hose Assembly, Setting Up Your Chipper Shredder Vacuum

3

Setting Up

Your

Chipper

Shredder

Vacuum

Attaching The Hose Assembly

5.a. Slide hose adapter of hose assembly into the base adapter located on the left front of the Yard Vacuum. See Figure 3-5.

	b. Pull spring loaded pin out on the base and align pin
A	with the first hole (closest to the end of the tube) in
	the hose adapter.
B	c. Release the pin to lock the hose in place.
	6. a. Snap the hose handle first into the upper hose
	handle bracket and then into the lower hose handle
Align pin	bracket. See Figure 3-6.
	b. Lay hose tubing on hanger bracket next to chipper
with this
	chute.
hole.
Figure 3-5

NOTE: The bag/chute

switch button attached A to the mounting

bracket must be fully depressed by the tip of front tab on bag handle when securing the bag or engine will not start.

B

Figure 3-6