3
Setting Up
Your
Chipper
Shredder
Vacuum
Upper Handle
Drive Control
Speed Control
Wing Nut
Upper Hose
Handle Bracket
Rope Guide | Cable Guide |
|
Star Knob
Lower Hose
Handle BracketCarriage
Screw
Lower Handle
Wing Nut
Bag
IMPORTANT
This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operat- ing your machine.
Safety Glasses | Hose |
| Assembly |
Bottle of Engine Oil | Blower Chute |
| |
Operator’s Manual |
|
Figure
NOTE: Reference to right and left hand side of the Chip- per/Shredder Vacuum is observed from the operating position.
IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your machine.
NOTE: Reference to right and left hand side of the Chip- per/Shredder Vacuum is observed from the operating position.
Opening Carton
1.Cut each corner of the carton vertically from top to bottom.
2.Remove all loose parts.
3.Remove loose packing material.
Removing Unit From Carton
1.Lift unit from the rear to detach it from underlying carton material and roll unit out of carton.
2.Check carton thoroughly for any other loose parts.
NOTE: Make sure not to crimp cables while removing loose parts or the entire unit from the carton.
Loose Parts In Carton
a.Upper and Lower Handle
b.Hose Assembly
c.Safety Glasses
d.Engine Oil (May be located in bag)
e.Bag
f.Blower Chute (If Equipped)
g.Operator’s Manual