To turn to the right while traveling in reverse, move the right drive control lever forward of the left lever. See Figure 5-8.

REARWARD RIGHT TURN

Figure 5-8

The greater the fore-to-aft distance between the two levers, the sharper the tractor will turn.

To execute a “pivot turn,” move the turn side drive control lever to the neutral position, while moving the other control lever rearward.

IMPORTANT: Making a “pivot turn” on grass will greatly increase the potential for defacement of the turf.

Executing a Zero Turn

warning!: When executing a zero turn, the tractor MUST BE STOPPED. Executing a zero turn while the tractor is moving can significantly reduce your control of the tractor and will cause severe turf defacement to occur.

Stop the forward or reverse motion of the tractor by moving the two drive control levers to neutral.

To turn clockwise, move the left control lever forward while simultaneously moving the right control lever rearward. See Figure 5-9.

CLOCKWISE ZERO TURN

Figure 5-9

To turn counterclockwise, move the right control lever forward while simultaneously moving the left control lever rearward. See Figure 5-10.

COUNTERCLOCKWISE ZERO TURN

Figure 5-10

Stopping the Tractor

Move both drive control levers to the neutral position to stop the motion of the tractor.

Push the PTO switch downward to the disengaged position.

Use the deck lift handle to raise the deck to its highest position.

If dismounting the tractor, move the drive control handles fully outward in the neutral position, engage the parking brake, move the throttle control lever to the fast position, turn the ignition switch to “OFF’” and remove the key from the switch.

warning: Do not leave the seat of the tractor without disengaging the PTO, moving drive control levers fully outward in the neutral position, and engaging the parking brake.

If leaving the tractor unattended, turn the ignition key off and remove key.

Driving On Slopes

Refer to the SLOPE GAUGE on page 7 to help determine slopes where you may not operate safely.

warning!: Do not operate on inclines with a slope in excess of 15 degrees (a rise of approximately 2-1/2 feet every 10 feet). The tractor could overturn and cause serious injury.

Always drive across slopes, never up and down. Control the speed and direction of the tractor using primarily the control lever on the downhill side of the tractor, with the uphill control lever remaining essentially in a fixed position.

Avoid turning downhill if possible. Start at the bottom of a slope and work upward. Always slow down before turning.

Use extra care and go slowly when turning downhill.

Section 5 — Operation

 

17

 

 

 

 

Page 17
Image 17
Troy-Bilt RZT manual Stopping the Tractor, Driving On Slopes, Executing a Zero Turn

RZT specifications

The Troy-Bilt RZT is a formidable lawn mower that brings a blend of efficiency, performance, and user-friendly features to the forefront of lawn care. Designed for homeowners who demand both power and precision, the RZT series offers a riding mower experience unlike any other.

One of the standout features of the Troy-Bilt RZT is its innovative Zero Turn Technology, which enables exceptional maneuverability. This technology allows users to make sharp turns and navigate around obstacles with ease, ensuring precise mowing in tight spaces. The dual lever steering system enhances control, allowing for quick direction changes and saving time on larger properties.

The engine options available with the RZT series range from powerful V-twin engines to reliable OHV engines, providing homeowners with choices that cater to their specific mowing requirements. These engines ensure robust performance, delivering the horsepower needed to tackle even the toughest grass and terrain.

The RZT models come equipped with reinforced deck materials that result in superior durability. The cutting deck typically ranges from 42 to 54 inches, allowing users to cover more ground in less time while achieving a clean, professional cut. Additionally, the adjustable cutting height feature provides versatility, enabling users to customize their mowing height based on grass type and conditions.

Troy-Bilt enhances user convenience with features such as an ergonomic seat design, ensuring maximum comfort during extended mowing sessions. The easy-to-access controls and dashboard simplify operation, making it suitable for both novice and experienced users alike.

Maintenance is made straightforward with Troy-Bilt’s integrated maintenance reminders and easy-to-reach grease points for routine upkeep. The mower's mulch kit option allows for grass clippings to be finely chopped and returned to the lawn, promoting a healthier turf while saving time on clean-up.

Overall, the Troy-Bilt RZT combines powerful performance, advanced technology, and practical user-focused features to create a reliable riding mower. Whether managing a suburban lawn or a larger property, the RZT series proves to be a top contender for those seeking to maintain their outdoor space efficiently and effectively.