Maintenance & Adjustments

Maintenance

Warning! Before performing any maintenance or repairs, disengage the PTO, move the drive control levers fully outward in the neutral position, engage the parking brake, stop the engine and remove the key to prevent unintended starting.

Engine

Refer to the Kohler Owner’s Manual for all engine maintenance intervals, procedures, specifications and instructions.

Changing the Engine Oil

Warning! If the engine has been recently run, the engine, muffler and surrounding metal

surfaces will be hot and can cause burns to the skin. Exercise caution to avoid burns.

To complete an oil change, proceed as follows:

1.Run the engine for a short time to warm the engine oil. The oil will flow more freely and carry away more impurities. Use care to avoid burns from hot oil.

2.Locate the oil drain hose on the left side of the engine. Refer to Figure 6-1.

3.Route the free end of the oil drain hose toward an appropriate oil collection container with at least a 2.5 quart capacity, to collect the used oil. Remove the oil fill cap/dipstick from the oil fill tube.

4.While holding the free end of the oil drain hose over the oil collection container, unscrew the square head hose plug from the end of the hose. See Figure 6-1.

Drain the engine oil into the collection container.

6

5.After draining the oil, wipe any residual oil from the oil drain hose. Thread the square head plug into the drain hose fitting and fully tighten the plug.

6.Replace the oil filter, and refill the engine with new oil as instructed in the Kohler Owner’s Manual.

Air Cleaner

Service the pre-cleaner and cartridge/air cleaner element as instructed in the Kohler Owner’s Manual.

Spark Plug

The spark plugs should be cleaned and the gap reset once a season. Refer to the Kohler Owner’s Manual for correct plug type and gap specifications.

Hydrostatic Transmission

The zero turn tractor is equipped with dual integrated hydrostatic pumps/transaxles that are sealed and are maintenance-free. Fluid levels cannot be checked and fluid cannot be added or changed.

General Battery Information

warning!

• Should battery acid accidentally splatter into the eyes or onto the skin, rinse the affected area immediately with clean cold water. If there is any further discomfort, seek prompt medical attention.

If acid spills on clothing, first dilute it with

 

clean water, then neutralize with a solution of

 

ammonia/water or baking soda/water.

NEVER connect (or disconnect) battery charger

Oil Fill Cap/Dipstick

Oil Fill Tube

Oil Filter

clips to the battery while the charger is turned

on, as it can cause sparks.

• Keep all sources of ignition (cigarettes, matches,

lighters) away from the battery. The gas

generated during charging can be combustible.

• As a further precaution, only charge the battery

in a well ventilated area.

• Always shield eyes and protect skin and clothing

when working near batteries.

• Batteries contain sulfuric acid and may emit

explosive gases. Use extreme caution when

handling batteries. Keep batteries out of the

reach of children.

Oil Drain Hose

 

Square Hd.

 

 

Hose Plug

 

 

Figure 6-1

Battery Maintenance

19

Page 19
Image 19
Troy-Bilt RZT manual Maintenance, Engine Changing the Engine Oil, Air Cleaner Spark Plug Hydrostatic Transmission

RZT specifications

The Troy-Bilt RZT is a formidable lawn mower that brings a blend of efficiency, performance, and user-friendly features to the forefront of lawn care. Designed for homeowners who demand both power and precision, the RZT series offers a riding mower experience unlike any other.

One of the standout features of the Troy-Bilt RZT is its innovative Zero Turn Technology, which enables exceptional maneuverability. This technology allows users to make sharp turns and navigate around obstacles with ease, ensuring precise mowing in tight spaces. The dual lever steering system enhances control, allowing for quick direction changes and saving time on larger properties.

The engine options available with the RZT series range from powerful V-twin engines to reliable OHV engines, providing homeowners with choices that cater to their specific mowing requirements. These engines ensure robust performance, delivering the horsepower needed to tackle even the toughest grass and terrain.

The RZT models come equipped with reinforced deck materials that result in superior durability. The cutting deck typically ranges from 42 to 54 inches, allowing users to cover more ground in less time while achieving a clean, professional cut. Additionally, the adjustable cutting height feature provides versatility, enabling users to customize their mowing height based on grass type and conditions.

Troy-Bilt enhances user convenience with features such as an ergonomic seat design, ensuring maximum comfort during extended mowing sessions. The easy-to-access controls and dashboard simplify operation, making it suitable for both novice and experienced users alike.

Maintenance is made straightforward with Troy-Bilt’s integrated maintenance reminders and easy-to-reach grease points for routine upkeep. The mower's mulch kit option allows for grass clippings to be finely chopped and returned to the lawn, promoting a healthier turf while saving time on clean-up.

Overall, the Troy-Bilt RZT combines powerful performance, advanced technology, and practical user-focused features to create a reliable riding mower. Whether managing a suburban lawn or a larger property, the RZT series proves to be a top contender for those seeking to maintain their outdoor space efficiently and effectively.