Section 4 | Troubleshooting / Error Messages |
Trouble- shooting by Symptom (cont.)
600 dpi MICR font not used in MICR | No MICR font installed. | Install the TROY Font Memory Card |
line (an incorrect font such as Courier |
| and reprint the document. |
or Times Roman was used instead). | MICR mode disabled and an attempt | Consult your software dealer. |
| ||
| was made to use a TROY MICR font. |
|
| Software error. | Enable MICR mode by issuing the |
|
| appropriate escape sequence via your |
|
| check writing software. |
| MICR font requested orientation | Install the correct orientation of MICR |
| (portrait or landscape) not installed in | font via the TROY Memory Card. |
| the printer. |
|
| Use the TROY MICR font or consult | |
|
| the |
|
| manufacturer for assistance. |
| Font escape sequence coding error. | Verify the escape sequence accuracy. |
|
|
|
MICR clear band has magnetically | Border, signature, or other printing | Reformat your document design to |
chargeable printing besides the MICR | extends into MICR clear band on front | ensure nothing besides the MICR line |
line on front or backside of document. | or back. | appears in the MICR clear band. |
| Reformat your document design or | |
| clear band on backside of the check. | other |
|
| is no MICR information on the check. |
|
|
|
Font Memory Card Kit User’s Guide |