Treadmill Preventative Maintenance
Checklist
Run calibration or run a manual program and watch and listen for anything out of the ordinary.
Perform a push off test (page
Inspect the belt surfaces, topside should still have texture for grip, bottom should be porous fabric- not glazed, smooth or hard.
Inspect deck surface, should be free of scratches, abrasions or blistering.
Listen for excessive bearing noise, from a standing position, in the front and rear roller and motor.
Check for front roller/belt slippage and belt tension adjustment. Look for slippage on drive pulley.
Inspect/ adjust tracking of belt.
Vacuum out motor area, being careful not to damage PWM.
Inspect drive belt for wear and cracking.
Wipe down machine- leave it in better condition than you found it.
