True Manufacturing Company TCGDZ-50 Electrical Instructions, True Food Service Equipment, Inc

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

ELECTRICAL INSTRUCTIONS

Step 4

A.Before your new unit is connected to a power supply, check the incoming voltage with a volt- meter. If anything less than 100% of the rated voltage for operation is noted, correct immedi- ately.

B.Models equipped with 9 ft. (3 m) power cord must be powered at proper operating voltage at all times.

Refer to cabinet data plate for voltage.

True requires that a sole use circuit be dedicated for the unit.

Warning

For proper performance of refrigerated cabinet an ambient temperature no greater than 75°F (24°C) with a relative humidity of 55% is required.

WARNING

Compressor warranties are void if compressor burns out due to low voltage.

WARNING

Power supply cord ground should not be removed!

NOTE

To reference wiring diagram - Remove lower rear grill. Wiring diagram is positioned on the ballast box inside lower rear of the cabinet.

6 www.truemfg.com 6