Tunturi T30 owner manual Console

T 03

•

AM UN LA

O NW RE S'

4

POWER CORD AND GROUNDING

INSTRUCTIONS

Plug the socket end of the power cord into the treadmill at the left front corner. Before connecting the device to a power source, make sure that local voltage matches that indicated on the type plate. The treadmill operates at 110 V or 230 V.

This treadmill must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with a cord having an equipment-grounded conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not use extension cables when connecting the equipment to the power source.

DANGER! Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman, if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

SAFETY TETHER KEY

The treadmill cannot be used if the tether key is not properly installed on the console; if the key is removed from its place, the treadmill will immediately stop. Place the safety tether key in its place on the console. Ensure that the clip of the safety tether key is properly attached to your clothing; as the cord tightens, make sure the clip does not detach itself from your clothing before the safety tether key disconnects from the console.

CONSOLE

Key Functions

Major Function Keys:

1.ELEVATION +: Increases the elevation level in the range from 0% to 12% shown in the HEART RATE / ELEVATION Display.

Pressing once increases 1 % and to speed up the decrement by pressing and holding it for 2 seconds.

2.ELEVATION –:Decreases the elevation level in the range from 0% to 12% shown in the HEART RATE/ ELEVATON Display. Pressing once increases 1 % and to speed up the decrement by pressing and holding it for 2 seconds.

3.RESET: Press this button to turn on or turn off the power.

4.START/STOP: Starts or stops the program.

5.SELECTION DIAL: The selection dial functions in two ways:

a)Rotating the dial. By rotating the dial clockwise, you can increase setting values and scroll the programs in an order of the programs. By rotating the dial anticlockwise, you can decrease setting values and scroll the programs in an order of the programs. During preset profiles and [HRC] you can adjust the intensity by rotating the dial.

b)Pressing the dial is [ENTER]. By pressing the dial, you can accept the selection you made when rotating the dial.

6.SPEED +: Increases the speed level in the range from 0.8 to 18.0 KPH (0.5 to 11 MPH) shown in the SPEED Display. Pressing once increases 0.1KPH (0.1 MPH) and to speed up the increment by pressing and holding it for 2 seconds.

7.SPEED –:Decreases the speed level in the range from 0.8 to 18.0 KPH (0.5 to 11 MPH) shown in the SPEED Display. Pressing once decreases 0.1 KPH (0.1 MPH) and to speed up the decrement by pressing and holding it for 2 seconds.

8.PSC: Position Speed Control (PSC) allows you to adjust the track speed without touching the console by changing your position on the track during exercise. The PSC function requires the use of a heart rate monitor. PSC can be used with manual exercises, HRC exercises with elevation adjustments and with the [Rolling Hills] profile.

Speed Hot Keys:

6 Speed Hot Keys are set as 4, 6, 8, 10, 12, and 14 KPH or set as 2, 3,4,5,6,7 MPH. For example, the speed changes from any speed to 8 KPH by pressing the Speed Hot Key 8.

Elevation Hot Keys:

6 Incline Hot Keys are set as 0,2,4,6,8 and 10% For example, the elevation level changes from any level to 4% by pressing the Elevation Hot Key 4.

T30_08_LOCKED.indd 4

16.5.2008 12:11:28