Turbo Air MSR-23NM Condenser Fan Motor, Defrost Heater, Lamp, Main Pcb, Display Pcb, Ballast

						MAIN COMPONENTS
4-6. CONDENSER FAN MOTOR
MODEL	MSR-23NM	MSR-49NM		MSF-23NM	MSF-49NM MSR-23G-1 MSR-49G-2
Voltage				115 V / 60 Hz
Motor Model				SR-043
Part code				R7423-020
4-7. DEFROST HEATER
MODEL	MSR-23NM	MSR-49NM		MSF-23NM	MSF-49NM MSR-23G-1 MSR-49G-2
Voltage				115 V / 60 Hz
Spec	─			445 W	600 W	─
Part code				R7303-400	R7303-410
4-8. LAMP
MODEL	MSR-23NM	MSR-49NM		MSF-23NM	MSF-49NM MSR-23G-1 MSR-49G-2
Voltage				115 V / 60 Hz
Spec			25 W			FLUORESCENT 32W/865RS
Part code			R7494-010			R7494-150
4-9. MAIN PCB
MODEL	MSR-23NM	MSR-49NM		MSF-23NM	MSF-49NM MSR-23G-1 MSR-49G-2
Voltage				115 V / 60 Hz
Part code	R7103-260			R7103-250		R7103-260
4-10. DISPLAY PCB
MODEL	MSR-23NM	MSR-49NM		MSF-23NM	MSF-49NM MSR-23G-1 MSR-49G-2
Voltage				115 V / 60 Hz
Part code				R7113-190
4-11. BALLAST
MODEL		MSR-23G-1				MSR-49G-2
Voltage				120V / 60Hz
Spce				32W
Part code				R7553-011

16

5. ELECTRONIC CONTROL INSTRUCTIONS

5-1. FREEZER CONTROL

5-1-1. How to use the display PCB panel

-88 LED

-It indicates setting temperature,

except defrost function -Door Open LED

-Temperature can be controlled by the user. -Factory setting is at level "2 ℉". Setting can be changed by pressing up/down button.

5-1-2. Manual Defrost Function

Press temperature setting UP/DOWN key for 2 seconds at the same time, manual defrost mode will start.

If you press UP/DOWN key for 2 seconds again on defrosting manual defrost will be cancelled and it will revert to nomal mode after 10 minutes of pause(Display panel indicates “DF” for pause period)

17