Manuals / Turbo Air / Household Appliance / Door

Turbo Air MSR-23G-1, MSR-49N, MSR-49G-2, MSR-23NM Replacement Of Main Components, Top Panel Parts

Models: MSR-49G-2 MSR-23NM MSF-49NM MSR-49N MSR-23G-1 MSF-23NM

1 21

Download 21 pages 59.1 Kb

Page 12

Image 12

6. REPLACEMENT OF MAIN COMPONENTS

REPLACEMENT OF MAIN COMPONENTS

6-1. TOP PANEL PARTS

- MAIN PCB	B. Untie the screws located on bottom of top panel.
- LOCK ASSEMBLY or POWER SWITCH	# caution : When unscrewing, hold the top panel.
- DOOR SWITCH	Panel may fall & cause injury.
A. Untie the screws located on top grille panel.

C. Place the top panel on top of the cabinet.

D. You can replace POWER-RELAY and MAIN PCB

MAIN PCB

POWER RELAY

MSF-23NM

Page 12

Image 12

Turbo Air MSR-23G-1, MSR-49N, MSR-49G-2, MSR-23NM, MSF-23NM, MSF-49NM manual Replacement Of Main Components, Top Panel Parts

FAQ

What are the main components that can be replaced?

The main components that can be replaced include the main PCB, lock assembly or power switch, and door switch.

Are there any precautions to take when replacing the components?

Caution should be taken when unscrewing the lock assembly or power switch to avoid injury, and when untying the screws located on the top grille panel.

Can the top panel be easily replaced?

Yes, the top panel can be easily replaced by untying the screws located on the bottom of the top panel and placing it on top of the cabinet.

Contents

Solid Door Glass DoorModel No. MSR-23NM MSR-49NM MSF-23NM MSF-49NM Model No. MSR-23G-1 MSR-49G-2TABLE OF CONTENTS 1. FEATURE CHART1. FEATURE CHART 2. WIRING DIAGRAM1-2.SIDE VIEWMSR-49NM 1-3.FRONT VIEWMSR-49G-22. WIRING DIAGRAM 1-4.SIDE VIEWMSR-49G-22-1.REFRIGERATOR MSR-23NM MSR-49NM MSR-23G-1 2-2.FREEZERMSF-23NM MSR-49G-23. PART DETAILS 3-1.TOP PANEL3-2.COMPRESSOR COMPARTMENT 3-3.DOOR 3-4.COOLING COMPARTMENT4. MAIN COMPONENTS 4-1.COMPRESSOR4-2.COMP. RELAY 4-3.DRYER4-6.CONDENSER FAN MOTOR 4-7.DEFROST HEATER4-8.LAMP 4-9.MAIN PCBERROR CODE FREEZER P. C . BP. C . B ERROR CODE SENSOR DESCRIPTION5-2.REFRIGERATOR CONTROL 6. REPLACEMENT OF MAIN COMPONENTS 6-1.TOP PANEL PARTS6-2REPLACING DOOR 6-3DOOR SPRING ADJUSTMENT 6-4. REVERSIBLE-DOORASSEMBLING METHOD PICTURE APICTURE B 6-5.REFRIGERATION COMPARTMENTS PARTS PICTURE CPICTURE D D. Replacing evaporator fan motor 6-6.CONDENSING UNIT Others Power-cord,Drain panDISPLAY T-SENSOR REFRIGERATOR C-SENSOR DISPLAY T-SENSOR6-7. LIGHTING-PARTS 7. PART-LIST 2.Separate connector of the ballastC. BALLAST 3. Untie two screws for separating the BallastPART-LIST