Turbo Air MSF-23NM, MSR-23G-1, MSR-49N manual Refrigeration Compartments Parts, Picture C, Picture D

⑥DOOR ASSEMBLY

⑤DOOR-HINGE BUSHING

①DOOR-HINGE STOP PIN

③DOOR-HINGE UPPER

-After assembling ③②, assemble ④⑤ -Insert④ into ⑥

-After inserting ⑦⑧, fix ③⑨

-Insert reversly for suitable spring elasticity

REPLACEMENT OF MAIN COMPONENTS

3. Assembling method of REVERSIBLE DOOR

1) After reversing 180 degree	③DOOR-HINGE	⑨M5*27 SCREW
DOOR ASSEMBLY of ⑥,
	LOWER
have the HANDLE be the	⑧DOOR-HINGE	⑦DOOR-HINGE
requested side.
2) Assemble as the following	SHAFT-LOWER	BUSHING

order

④DOOR-HINGE SHAFT-UPPER

②M5*27 SCREW

PICTURE C

#Attention : When screw connected, should well be connected to maintain sufficient sustain

4.Assembling TOP GRILL and GRILL ASSEMBLY

1) Connect the screw at the		①
location ① on the top
and bottom of the top grill
2) Connect the screw at the
location ② on the left and
right side of the grill assembly.
	②

PICTURE D

REPLACEMENT OF MAIN COMPONENTS

6-5. REFRIGERATION COMPARTMENT'S PARTS

-LAMP BULB, LAMP SHIELD

-EVAPORATOR FAN MOTOR

-D-SENSOR, C-SENSOR, T-SENSOR

-EVAPORATOR COIL

-EVAPORATOR DEFROST HEATER A. Disassemble lamp shield

LAMP BULB

LAMP SOCKET

LAMP SHIELD

B. Disassemble duct

EVAPORATOR

DEFROST HEATOR

EVAPORATOR FAN MOTOR

C. Pull out the lamp

EVAPORATOR DRAIN PAN HEATER

30 31