Turbo Chef Technologies 2620 Reducing Fire Risk, Preventing Oven Damage, Grounding Instructions

Models: 2020 2620

1 36
Download 36 pages 936 b
Page 8
Image 8
iiSafety Information

iiSafety Information

Reducing Fire Risk

If materials inside the oven ignite or if smoke is observed,

1.Turn off the oven.

2.Disconnect the power cord or shut off power at the fuse/circuit breaker panel.

oCarefully attend the oven if paper, plastic, or other combustible materials are placed inside the oven

to facilitate cooking.

DO NOT leave items in the cook cavity when the oven is not in use.

DO NOT cook items wrapped in cling wrap or plastic film.

DO NOT overcook food.

Preventing Oven Damage

oWhen servicing this appliance, do not tear insulation to get to components. Rather, find the edge of the insulation and remove the tape that holds it in place.

oClean the oven daily.

oClean the oven only with TurboChef Oven Cleaner.

DO NOT clean with a water jet.

DO NOT allow cleaning solution or water to remain in the cook cavity longer than necessary.

Grounding Instructions

Reducing Fire Risk WARNING: Improper grounding increases the risk of electric shock.

This appliance must be grounded. The cord is equipped with a grounding wire and plug, which in the event of an electrical short circuit, reduce the risk of electric shock by providing an escape wire for the electric current. The wire must be plugged into an outlet that is properly installed and grounded.

Consult a qualified electrician or serviceman to determine whether or not the appliance is properly grounded.

do not use an extension cord. If the power supply cord is too short, request a qualified electrician or serviceman to install an outlet near the appliance.

Power Cord Replacement

To avoid potential hazards, only the manufacturer, its service agent, or a similarly-qualified person should replace a damaged power cord.

Page 8
Image 8
Turbo Chef Technologies 2620 Reducing Fire Risk, Preventing Oven Damage, Grounding Instructions, Power Cord Replacement