user manual
MILAN
Stereo PA with an external mixer and subwoofer(s)
In this example, sub frequencies are routed to a separate subwoofer(s) in order to gain extended frequency response and higher overall sound level. Connect the mixer output first to the subwoofers and then loop up to the Milan loudspeakers. Set the MIC/LINE switch to LINE and set the BASS MODE switch to the ‘B’ position to roll off the low frequencies to the Milan MI5 loudspeakers. The tone controls on both cabinets should be set to the same positions, nominally flat to begin with. Ensure that the mixer outputs are not clipping, and then adjust both loudspeakers’ level controls to the desired loudness.
BASS | TREBLE | MIX OUT |
0 | 0 |
|
+ | + |
|
LEVEL | INPUT 1 | INPUT 2 |
|
| BASS | TREBLE | MIX OUT |
|
| 0 | 0 |
|
| LIMIT |
|
|
|
BASS |
|
|
|
|
MODE |
|
|
|
|
A B |
|
|
| |
|
|
|
| |
| POWER | + | + |
|
|
|
|
| |
LEVEL | LEVEL | INPUT 1 | INPUT 2 |
LIMIT
BASS
MODE
A B
POWER
LEVEL
MIN MAX
MIC LINE
MIN | MAX | MIN | MAX | MIN | MAX |
LINE | MIC | MIC | LINE | LINE | MIC |
POWERED SUB-BASS
POWERED
MILAN user manual Page 17