user manual
MILAN
Stereo PA with an external mixer
Two Milan loudspeakers form the left and right elements of a stereo PA setup with all signal sources connected to an external mixing console. Ensure that the mic/line switch is set to LINE on both loudspeakers. Set the BASS MODE switch to the ‘A’ position when not using subwoofers. Bring up the master faders on the mixer, ensuring that the outputs are not clipping, and then adjust both loudspeakers’ level controls to the desired loudness. For consistent balance and response set the tone controls to approximately the same positions on both cabinets.
LEFT | RIGHT |
BASS | TREBLE | MIX OUT |
0 | 0 |
|
+ | + |
|
LEVEL | INPUT 1 | INPUT 2 |
|
| BASS | TREBLE | MIX OUT |
|
| 0 | 0 |
|
| LIMIT |
|
|
|
BASS |
|
|
|
|
MODE |
|
|
|
|
A B |
|
|
| |
|
|
|
| |
| POWER | + | + |
|
|
|
|
| |
LEVEL | LEVEL | INPUT 1 | INPUT 2 | |
LIMIT
BASS
MODE
A B
POWER
LEVEL
MIN MAX
MIC 
LINE
MIN | MAX | MIN | MAX | MIN | MAX |
LINE | MIC | MIC | LINE | LINE | MIC |
MILAN user manual Page 16
