TV Ears Headphones user manual Installation Instructions, Plug in the Audio Cord, Before you start

Installation Instructions

Your new Original Plus System should come with all necessary cords pre-connected into the transmitter and power stacker. Do not unplug any cords. If the cords come unplugged, the following instructions include directions to re-connect in the cords.

Before you start

The transmitter and power stacker should already be stacked. If they are not, place the transmitter on top of the power stacker. This stacked combination will be called the stack 12 throughout the instructions.

Step 1 Plug in the Audio Cord

For best results, plug the audio cord into your television’s analog (RCA) audio out ports.

1.Plug the dual end of the audio cord 14 (red and black male plugs) into the analog (RCA) audio out ports on the back of the television. *

2. The single end of the audio cord should already be plugged into the port labeled ‘Audio’ 9 on the back of the TV Ears transmitter.

If the audio cord is not plugged into the transmitter, plug it in now.

3.The power stacker cord 15 should already be plugged into the port labeled ‘EXT’ on the back of both the transmitter and power stacker 11 .

If the power stacker cord is not plugged in, plug the red end of the cord into the port labeled ‘EXT’ on the back of the transmitter. Plug the black end of the power stacker cord into the port

labeled ‘EXT’ on the back of the power stacker.

*If audio out ports are not available on the back of your television: use the audio out ports on your cable or satellite box.

*If outside the U.S and audio out ports are not available on the back of your television: use a SCART to RCA signal out adapter.

To use a DVD player or VCR when the audio cord is plugged into a cable or satellite box:

1.Take the dual end of the audio cord 14 (red and black male plugs); gently pull apart the red and black plugs.

2.Insert the red plug into the analog (RCA) audio out ports of the cable or satellite box.

3.Insert the black plug into the analog (RCA) audio out

		ports of the DVD player or VCR.
	12	4. The single end of the audio cord should already be
		plugged into the audio port labeled ‘Audio’ on the
	14	back of the TV Ears transmitter. If the audio cord is not
		plugged into the transmitter, plug it in now.
		When installed this way, you must turn off whichever
		device is not in use. Turn off the cable/satellite box when
		watching a DVD or video. Turn off the DVD/VCR player
14	TV	when watching TV. Function may vary depending on set
	AUDIO OUT	up.

Alternate Installation Kit:

This kit comes with your Original Plus System. Use this kit if audio out ports are not available or not present.

Option 1: Power Microphone

1.Plug the power microphone into the female end of the extender cord.

14	DVD	2. Plug the male end of the extender cord into the port labeled
	AUDIO OUT	‘Audio’ 9 on the back of the transmitter.
		3. Remove the protective cover from the Velcro on the power
	SATELLITE	microphone. Stick the power microphone to the television
		speaker.
	AUDIO OUT
		The TV volume must be on for the power microphone to
		work. The TV volume cannot be muted when using the
		power microphone.	Page 4