Tyan Computer B2933 manual Installing the Server in an Open Rack with Rail kit B

2.5.2Installing the Server in an Open Rack (with Rail kit B)

In addition to rackmounting the GT14 in a 4-post rack, you can also mount it in a 2-post rack. You must use rail kit B to mount the GT14 in this type of rack.

2-post open rack

NOTE: Before mounting the Transport GT14 in a rack, ensure that all internal components have been installed and that the unit has been fully tested. Maintenance can be performed on the unit while in a rack but it is preferable to install the device in a fully operational condition.

1.Install the inner rail brackets to left and right sides of chassis using 3 M4-4L(E) screws for each side.

Chapter 2: Setting Up 53