2.5.1Installing the Server in a Rack (with Rail kit A)
Follow these instructions to mount the GT14 into an industry standard 19" rack.
(Rail kit A)
NOTE: Before mounting the Transport GT14 in a rack, ensure that all internal components have been installed and that the unit has been fully tested. Maintenance can be performed on the unit while in a rack but it is preferable to install the device in a fully operational condition.
Installing the Inner Rails to Chassis
1.Screw the mounting ear to each side of GT14 as shown using 2 screws from the supplied mounting ear kit.
2.Press the latch and draw out the inner rails from rail assembly.
48 | Chapter 2: Setting Up |
