Installing the Serial Touch Driver (not applicable to Acoustic

Pulse Recognition monitors)

Installing the Serial Touch Driver for Windows XP,

Windows 2000, Me, 95/98 and NT4.0

NOTE: For Windows 2000 and NT 4.0 you must have administrator access rights to install

the driver.

1Insert the Elo CD-ROM in your computer's CD-ROM drive.

2If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program.

3Follow the directions on the screen to complete the driver setup for your version of Windows.

4If the AutoStart feature is not active:

5Click Start > Run.

6Click the Browse button to locate the EloCd.exe program on the CD-ROM.

7Click Open, then OK to run EloCd.exe.

8Follow the directions on the screen to complete the driver setup for your version of Windows.

To install Windows 2000 and Windows XP, you must use the "update driver" method; you will not find a setup.exe file within the download.

7

Page 11
Image 11
Tyco Electronics 1915L manual Driver, Click Start Run