Manuals / Brands / Home Audio / Radio / Tyco Electronics / Home Audio / Radio

Tyco Electronics MM102014V1 MM102014V1, Rev. G , 4.2.5 Dwell Display

1 64

Download 64 pages, 1.54 Mb

MM102014V1, Rev. G

19

4.2.5 Dwell Display

When not engaged in menu selection, the 2-line display defaults to the user-defined default display,

known as the “dwell display.” The top line indicates the currently selected talk group. The bottom line

indicates the currently selected profile, received talk group/caller ID/alias5, V-TAC mode, V-TAC

channel, or radio channel. To set one of these bottom line options, press the Select button from the dwell

display.

Table 4-2: Display Parts and Functions

COMPONENT FUNCTION

Network

Connectivity

(OTP Mode

only)

Icon

When lit, the network connectivity icon

indicates a network connection.

VOLUME Icon

Indicates current speaker volume setting

chosen by the user. Note that a momentary

numerical representation will also be shown

within the display while the volume is being

adjusted.

TWO TEXT

LINES

During a menu session, the display’s bottom

line responds to  (up arrow) and  (down

arrow) buttons. It indicates the current menu.

For example, the Talk Group Menu is selected

in Figure 4-3.

The display’s top line responds to the  (left

arrow) and(right arrow) buttons. It indicates

the options within the current menu. For

example, “Police1” is the currently selected

talk group in Figure 4-3.

5 Alias is a logical ID name such as “J_Smith.” The name corresponds to a user ID such as 003-542-0001. Alias is limited to

eight (8) characters.

Contents

Main M-803 MM102014V1, Rev. G Page Page Page 1 REGULATORY AND SAFETY INFORMATION 2 SAFETY INFORMATION 2.1 OCCUPATIONAL SAFETY GUIDELINES AND SAFETY TRAINING INFORMATION 2.2 COMMON HAZARDS MM102014V1, Rev. G 3 PRODUCT DESCRIPTION 3.1 VOICE OPERATION 3.2 DATA OPERATION 3.3 REMOTE CONTROL HEAD OPERATION 3.4 INTERCOM OPERATION 3.5 V-TAC OPERATION 3.6 PERSONALITY 3.6.1 Profiles 3.6.2 Talk Groups 3.7 GPS OPTION 3.8 FRONT PANEL 3.9 M-803 REAR PANEL MM102014V1, Rev. G 3.10 CONTROL HEAD REAR PANEL 3.11 V-TAC REAR PANEL 4 BASIC OPERATION 4.1 FRONT PANEL COMPONENTS OVERVIEW Table 4-1: Front Panel Controls and Functions 4.2 DISPLAY OVERVIEW Page MM102014V1, Rev. G 4.2.5 Dwell Display MM102014V1, Rev. G Table 4-3: Basic Menu Structure 21 Use (up arrow) and (down arrow) to scroll through menus. 4.2.6 Menu Display and Control Area MM102014V1, Rev. G 4.2.7 Dwell Display User-Selectable 4.3 ADJUSTING DISPLAY & BUTTON BACKLIGHT BRIGHTNESS 4.4 STEALTH MODE 4.5 ADJUSTING SIDE TONE AUDIO LEVEL 4.6 CHANGE OPERATING MODE 5 BASIC OPERATION IN OTP MODE 5.1 TURNING THE RADIO ON 5.2 SELF-TEST 5.3 LOGGING IN TO THE NETWORK 5.4 LOGGING OFF THE NETWORK 5.5 TURNING THE RADIO OFF MM102014V1, Rev. G 5.6 RECEIVING AND TRANSMITTING VOICE CALLS 5.6.1 Receiving a Voice Call 5.6.2 Transmitting a Voice Call 5.7 RADIO TONES Page 5.8 ADJUSTING SPEAKER/HEADSET AUDIO TREBLE LEVEL 5.9 CHECKING OR CHANGING THE ACTIVE PROFILE 5.10 CHECKING OR CHANGING THE SELECTED TALK GROUP 5.11 INTERCOM MODE 5.12 TALK GROUP LOCK OUT MM102014V1, Rev. G 5.12.1 Locking Out a Talk Group 5.12.2 Unlocking a Talk Group MM102014V1, Rev. G 5.12.3 Caution Regarding Profile Changes 5.13 SCAN MODE MM102014V1, Rev. G 5.13.1 Checking or Changing Active Scan Mode MM102014V1, Rev. G 5.13.2 Changing Priority Talk Group 5.14 SELECTIVE CALL MM102014V1, Rev. G 5.14.1 Making a Selective Call 5.14.2 Receiving a Selective Call 5.15 SELECTIVE ALERT MM102014V1, Rev. G 5.15.1 Sending Selective Alert Messages MM102014V1, Rev. G 5.15.2 Receiving Selective Alert Messages 5.15.3 Defining Pre-Programmed Messages 5.16 TELEPHONE INTERCONNECT CALLS MM102014V1, Rev. G 5.17 EMERGENCY COMMUNICATIONS 5.17.1 Declaring an Emergency Call or Alert MM102014V1, Rev. G 5.17.2 Silent Emergency 5.17.3 Clearing an Emergency Call or Alert 5.17.4 Receiving an Emergency Call MM102014V1, Rev. G 5.17.5 Dismissing an Emergency Call 5.18 DUAL-TONE MULTI-FREQUENCY KEYPAD MM102014V1, Rev. G 5.18.1 Password Entry MM102014V1, Rev. G 5.18.2 DTMF Overdial 5.19 ENCRYPTION 5.19.1 Automatic Encryption 5.19.2 Manual Encryption 5.20 PRESET BUTTONS 5.21 DYNAMIC REGROUPING 5.22 GPS COORDINATES 5.23 V-TAC FUNCTIONS MM102014V1, Rev. G 5.23.1 Extended Coverage Modes (XCOV & XCOV-TG) Page MM102014V1, Rev. G 5.23.2 V-TAC GPS Interlock MM102014V1, Rev. G 5.23.3 Scene-Of-Incident Mode (SOI) MM102014V1, Rev. G 5.23.4 Mobile-Only Mode (Mobile) 5.23.5 Manually Changing V-TAC Mode 5.23.6 Displaying V-TAC Information MM102014V1, Rev. G 5.24 ENGINEERING DISPLAY 5.24.1 Voice and Data Registration Codes 5.24.2 Transceiver Status Page 5.25 RECEIVE SIGNAL STRENGTH INDICATION (RSSI) 5.26 CONTROL BLOCK SYMBOL ERROR RATE (CBSER) 6 BASIC OPERATION IN OCF MODE 6.1 TURNING THE RADIO ON 6.2 TURNING THE RADIO OFF 6.3 PRESET BUTTONS 6.4 SQUELCH 6.5 SELECT MONITOR MODE MM102014V1, Rev. G 6.5.1 Setting Monitor Mode 6.5.2 Duration of Monitor Mode Selections 6.6 GROUP CALLS IN P25 (DIGITAL) MODE 6.7 EMERGENCY GROUP CALLS IN P25 MODE 7 BASIC TROUBLESHOOTING Page 8 WARRANTY