Manuals / Brands / Home Audio / Radio / Tyco Electronics / Home Audio / Radio

Tyco Electronics MM102014V1 5.20 PRESET BUTTONS

1 64

Download 64 pages, 1.54 Mb

MM102014V1, Rev. G

The key must be pre-determined by the users prior to making a manually encrypted call on

a talk group. It can be between one and sixteen (1 - 16) digits and it is entered into the

radio using the keypad on the DTMF microphone.

If two communicating radios have different (manually-defined) keys, receive audio at

each radio will sound garbled.

With manual encryption enabled, unencrypted radio users on the talk group can still make standard voice

(unencrypted) calls on the talk group. However, if an unencrypted user attempts to transmit on the talk

group when one of the encrypted users is already transmitting on the talk group, the unencrypted radio

will sound a deny tone and “No Access” will appear in the display. Also, the encrypted user can hear

standard unencrypted calls, but cannot respond while still manually encrypted.

CAUTION

Do not set a talk group for manual encryption if it has been set for encryption by

the network administration personnel.

Perform the following to transmit or receive manually encrypted calls:

1. Press *32 on the DTMF microphone keypad.

2. Enter the key (up to 16 digits).

3. Press the # key.

There is a two (2) second delay between entering the encryption key and manual

encryption feature taking affect.

4. To end manual encryption, press *33#.

If a user is engaged in a call on a talk group that has been manually encrypted at the radio level, the user

will see “Secure Call” on the bottom of the dwell display.

If a secure (encrypted) call is in progress, and the user has not entered the key, the bottom of the dwell

display will alternate between “No Access” and the alias of the radio that is currently engaged in the

secure call.

Once the user has terminated manual encryption, “UnSecure” appears temporarily in the bottom line of

the dwell display.

5.20 PRESET BUTTONS

The front panel contains three buttons labeled A, B, and C. By holding one of these buttons down for

approximately three (3) seconds, the following current information is saved to the function of that button:

• Selected talk group

• Selected profile

• Selected priority talk group

• Lockouts

47

Contents

Main M-803 MM102014V1, Rev. G Page Page Page 1 REGULATORY AND SAFETY INFORMATION 2 SAFETY INFORMATION 2.1 OCCUPATIONAL SAFETY GUIDELINES AND SAFETY TRAINING INFORMATION 2.2 COMMON HAZARDS MM102014V1, Rev. G 3 PRODUCT DESCRIPTION 3.1 VOICE OPERATION 3.2 DATA OPERATION 3.3 REMOTE CONTROL HEAD OPERATION 3.4 INTERCOM OPERATION 3.5 V-TAC OPERATION 3.6 PERSONALITY 3.6.1 Profiles 3.6.2 Talk Groups 3.7 GPS OPTION 3.8 FRONT PANEL 3.9 M-803 REAR PANEL MM102014V1, Rev. G 3.10 CONTROL HEAD REAR PANEL 3.11 V-TAC REAR PANEL 4 BASIC OPERATION 4.1 FRONT PANEL COMPONENTS OVERVIEW Table 4-1: Front Panel Controls and Functions 4.2 DISPLAY OVERVIEW Page MM102014V1, Rev. G 4.2.5 Dwell Display MM102014V1, Rev. G Table 4-3: Basic Menu Structure 21 Use (up arrow) and (down arrow) to scroll through menus. 4.2.6 Menu Display and Control Area MM102014V1, Rev. G 4.2.7 Dwell Display User-Selectable 4.3 ADJUSTING DISPLAY & BUTTON BACKLIGHT BRIGHTNESS 4.4 STEALTH MODE 4.5 ADJUSTING SIDE TONE AUDIO LEVEL 4.6 CHANGE OPERATING MODE 5 BASIC OPERATION IN OTP MODE 5.1 TURNING THE RADIO ON 5.2 SELF-TEST 5.3 LOGGING IN TO THE NETWORK 5.4 LOGGING OFF THE NETWORK 5.5 TURNING THE RADIO OFF MM102014V1, Rev. G 5.6 RECEIVING AND TRANSMITTING VOICE CALLS 5.6.1 Receiving a Voice Call 5.6.2 Transmitting a Voice Call 5.7 RADIO TONES Page 5.8 ADJUSTING SPEAKER/HEADSET AUDIO TREBLE LEVEL 5.9 CHECKING OR CHANGING THE ACTIVE PROFILE 5.10 CHECKING OR CHANGING THE SELECTED TALK GROUP 5.11 INTERCOM MODE 5.12 TALK GROUP LOCK OUT MM102014V1, Rev. G 5.12.1 Locking Out a Talk Group 5.12.2 Unlocking a Talk Group MM102014V1, Rev. G 5.12.3 Caution Regarding Profile Changes 5.13 SCAN MODE MM102014V1, Rev. G 5.13.1 Checking or Changing Active Scan Mode MM102014V1, Rev. G 5.13.2 Changing Priority Talk Group 5.14 SELECTIVE CALL MM102014V1, Rev. G 5.14.1 Making a Selective Call 5.14.2 Receiving a Selective Call 5.15 SELECTIVE ALERT MM102014V1, Rev. G 5.15.1 Sending Selective Alert Messages MM102014V1, Rev. G 5.15.2 Receiving Selective Alert Messages 5.15.3 Defining Pre-Programmed Messages 5.16 TELEPHONE INTERCONNECT CALLS MM102014V1, Rev. G 5.17 EMERGENCY COMMUNICATIONS 5.17.1 Declaring an Emergency Call or Alert MM102014V1, Rev. G 5.17.2 Silent Emergency 5.17.3 Clearing an Emergency Call or Alert 5.17.4 Receiving an Emergency Call MM102014V1, Rev. G 5.17.5 Dismissing an Emergency Call 5.18 DUAL-TONE MULTI-FREQUENCY KEYPAD MM102014V1, Rev. G 5.18.1 Password Entry MM102014V1, Rev. G 5.18.2 DTMF Overdial 5.19 ENCRYPTION 5.19.1 Automatic Encryption 5.19.2 Manual Encryption 5.20 PRESET BUTTONS 5.21 DYNAMIC REGROUPING 5.22 GPS COORDINATES 5.23 V-TAC FUNCTIONS MM102014V1, Rev. G 5.23.1 Extended Coverage Modes (XCOV & XCOV-TG) Page MM102014V1, Rev. G 5.23.2 V-TAC GPS Interlock MM102014V1, Rev. G 5.23.3 Scene-Of-Incident Mode (SOI) MM102014V1, Rev. G 5.23.4 Mobile-Only Mode (Mobile) 5.23.5 Manually Changing V-TAC Mode 5.23.6 Displaying V-TAC Information MM102014V1, Rev. G 5.24 ENGINEERING DISPLAY 5.24.1 Voice and Data Registration Codes 5.24.2 Transceiver Status Page 5.25 RECEIVE SIGNAL STRENGTH INDICATION (RSSI) 5.26 CONTROL BLOCK SYMBOL ERROR RATE (CBSER) 6 BASIC OPERATION IN OCF MODE 6.1 TURNING THE RADIO ON 6.2 TURNING THE RADIO OFF 6.3 PRESET BUTTONS 6.4 SQUELCH 6.5 SELECT MONITOR MODE MM102014V1, Rev. G 6.5.1 Setting Monitor Mode 6.5.2 Duration of Monitor Mode Selections 6.6 GROUP CALLS IN P25 (DIGITAL) MODE 6.7 EMERGENCY GROUP CALLS IN P25 MODE 7 BASIC TROUBLESHOOTING Page 8 WARRANTY