Manuals / Brands / Home Audio / Radio / Tyco Electronics / Home Audio / Radio

Tyco Electronics MM102014V1 5.10 CHECKING OR CHANGING THE SELECTED TALK GROUP , 5.11 INTERCOM MODE

1 64

Download 64 pages, 1.54 Mb

MM102014V1, Rev. G

Figure 5-3: Profile Menu

5.10 CHECKING OR CHANGING THE SELECTED TALK GROUP

Each profile stored in the radio can have up to sixteen (16) talk groups. One talk group within the

currently active profile is set as the “selected talk group.” For the radio user, the selected talk group is

typically the focus of most voice transmissions and receptions. There are two ways to change the selected

talk group:

First Method:

1. Use the ▲ and ▼ buttons to scroll through the menu until “TalkGrpMenu” appears on the bottom

line of the display. The currently selected talk group appears in the top line of the display. For

example, “Police1” as shown in Figure 5-4.

2. Use the ◄ or ► buttons to scroll through the available list of talk groups in the active profile. This

list is determined by the OpenSky network administrator.

OR

Second Method:

1. From the dwell display, press the  or  buttons to scroll through the available list of talk groups in

the active profile.

Figure 5-4: Talk Group Menu

5.11 INTERCOM MODE

The optional intercom mode gives users at multiple control heads connected to the same radio the ability

communicate with each other without transmitting over-the-air. Turn intercom mode on and off using the

“INTERCOM” menu as follows:

32

Contents

Main M-803 MM102014V1, Rev. G Page Page Page 1 REGULATORY AND SAFETY INFORMATION 2 SAFETY INFORMATION 2.1 OCCUPATIONAL SAFETY GUIDELINES AND SAFETY TRAINING INFORMATION 2.2 COMMON HAZARDS MM102014V1, Rev. G 3 PRODUCT DESCRIPTION 3.1 VOICE OPERATION 3.2 DATA OPERATION 3.3 REMOTE CONTROL HEAD OPERATION 3.4 INTERCOM OPERATION 3.5 V-TAC OPERATION 3.6 PERSONALITY 3.6.1 Profiles 3.6.2 Talk Groups 3.7 GPS OPTION 3.8 FRONT PANEL 3.9 M-803 REAR PANEL MM102014V1, Rev. G 3.10 CONTROL HEAD REAR PANEL 3.11 V-TAC REAR PANEL 4 BASIC OPERATION 4.1 FRONT PANEL COMPONENTS OVERVIEW Table 4-1: Front Panel Controls and Functions 4.2 DISPLAY OVERVIEW Page MM102014V1, Rev. G 4.2.5 Dwell Display MM102014V1, Rev. G Table 4-3: Basic Menu Structure 21 Use (up arrow) and (down arrow) to scroll through menus. 4.2.6 Menu Display and Control Area MM102014V1, Rev. G 4.2.7 Dwell Display User-Selectable 4.3 ADJUSTING DISPLAY & BUTTON BACKLIGHT BRIGHTNESS 4.4 STEALTH MODE 4.5 ADJUSTING SIDE TONE AUDIO LEVEL 4.6 CHANGE OPERATING MODE 5 BASIC OPERATION IN OTP MODE 5.1 TURNING THE RADIO ON 5.2 SELF-TEST 5.3 LOGGING IN TO THE NETWORK 5.4 LOGGING OFF THE NETWORK 5.5 TURNING THE RADIO OFF MM102014V1, Rev. G 5.6 RECEIVING AND TRANSMITTING VOICE CALLS 5.6.1 Receiving a Voice Call 5.6.2 Transmitting a Voice Call 5.7 RADIO TONES Page 5.8 ADJUSTING SPEAKER/HEADSET AUDIO TREBLE LEVEL 5.9 CHECKING OR CHANGING THE ACTIVE PROFILE 5.10 CHECKING OR CHANGING THE SELECTED TALK GROUP 5.11 INTERCOM MODE 5.12 TALK GROUP LOCK OUT MM102014V1, Rev. G 5.12.1 Locking Out a Talk Group 5.12.2 Unlocking a Talk Group MM102014V1, Rev. G 5.12.3 Caution Regarding Profile Changes 5.13 SCAN MODE MM102014V1, Rev. G 5.13.1 Checking or Changing Active Scan Mode MM102014V1, Rev. G 5.13.2 Changing Priority Talk Group 5.14 SELECTIVE CALL MM102014V1, Rev. G 5.14.1 Making a Selective Call 5.14.2 Receiving a Selective Call 5.15 SELECTIVE ALERT MM102014V1, Rev. G 5.15.1 Sending Selective Alert Messages MM102014V1, Rev. G 5.15.2 Receiving Selective Alert Messages 5.15.3 Defining Pre-Programmed Messages 5.16 TELEPHONE INTERCONNECT CALLS MM102014V1, Rev. G 5.17 EMERGENCY COMMUNICATIONS 5.17.1 Declaring an Emergency Call or Alert MM102014V1, Rev. G 5.17.2 Silent Emergency 5.17.3 Clearing an Emergency Call or Alert 5.17.4 Receiving an Emergency Call MM102014V1, Rev. G 5.17.5 Dismissing an Emergency Call 5.18 DUAL-TONE MULTI-FREQUENCY KEYPAD MM102014V1, Rev. G 5.18.1 Password Entry MM102014V1, Rev. G 5.18.2 DTMF Overdial 5.19 ENCRYPTION 5.19.1 Automatic Encryption 5.19.2 Manual Encryption 5.20 PRESET BUTTONS 5.21 DYNAMIC REGROUPING 5.22 GPS COORDINATES 5.23 V-TAC FUNCTIONS MM102014V1, Rev. G 5.23.1 Extended Coverage Modes (XCOV & XCOV-TG) Page MM102014V1, Rev. G 5.23.2 V-TAC GPS Interlock MM102014V1, Rev. G 5.23.3 Scene-Of-Incident Mode (SOI) MM102014V1, Rev. G 5.23.4 Mobile-Only Mode (Mobile) 5.23.5 Manually Changing V-TAC Mode 5.23.6 Displaying V-TAC Information MM102014V1, Rev. G 5.24 ENGINEERING DISPLAY 5.24.1 Voice and Data Registration Codes 5.24.2 Transceiver Status Page 5.25 RECEIVE SIGNAL STRENGTH INDICATION (RSSI) 5.26 CONTROL BLOCK SYMBOL ERROR RATE (CBSER) 6 BASIC OPERATION IN OCF MODE 6.1 TURNING THE RADIO ON 6.2 TURNING THE RADIO OFF 6.3 PRESET BUTTONS 6.4 SQUELCH 6.5 SELECT MONITOR MODE MM102014V1, Rev. G 6.5.1 Setting Monitor Mode 6.5.2 Duration of Monitor Mode Selections 6.6 GROUP CALLS IN P25 (DIGITAL) MODE 6.7 EMERGENCY GROUP CALLS IN P25 MODE 7 BASIC TROUBLESHOOTING Page 8 WARRANTY