Manuals / Brands / Home Audio / Radio / Tyco Electronics / Home Audio / Radio

Tyco Electronics MM102014V1 2 SAFETY INFORMATION

1 64

Download 64 pages, 1.54 Mb

MM102014V1, Rev. G

2 SAFETY INFORMATION

The M-803 digital mobile radio generates RF electromagnetic energy during

transmit mode. This radio is designed for and classified as “Occupational Use

Only”, meaning it must be used only during the course of employment by

individuals aware of the hazards and the ways to minimize such hazards. This

radio is NOT intended for use by the “General Population” in an uncontrolled

environment.

This radio has been tested and complies with the FCC RF exposure limits for “Occupational Use Only.”

In addition, the M-803 digital mobile radio complies with the following Standards and Guidelines with

regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to

humans:

• FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for

Human Exposure to Radio Frequency Electromagnetic Fields.

• American National Standards Institute (C95.1 – 1992), IEEE Standard for Safety Levels with Respect

to Human Exposure to Radio Frequency Electromagnetic Fields, 3kHz to 300 GHz.

Use of this radio as described below will result in user exposure substantially below the FCC

recommended limits for human exposure to Radio Frequency Electromagnetic energy.

Before operating this radio:

• Do not operate this radio if any of the RF connectors are not secure or if open connections are not

properly terminated.

• Do not operate this radio near electrical blasting caps or in an explosive atmosphere.

This radio has been tested and complies with the FCC RF exposure limits for Uncontrolled Exposure and

Occupational exposure. The difference is in the minimum safe distance that people must be away from

the antenna when transmitting RF energy. To assure optimal radio performance and that human exposure

to RF electromagnetic energy is within the guidelines, transmit only when people are at least the

minimum distance away from a properly installed antenna. Refer to Table 2-1 for the minimal allowable

distances.

Note that the M-803 can transmit without pressing the PTT as part of the normal registration process the

radio periodically performs. The TX light behind the SELECT button on the front panel will glow red

when this or any transmission is in process.

7

Contents

Main M-803 MM102014V1, Rev. G Page Page Page 1 REGULATORY AND SAFETY INFORMATION 2 SAFETY INFORMATION 2.1 OCCUPATIONAL SAFETY GUIDELINES AND SAFETY TRAINING INFORMATION 2.2 COMMON HAZARDS MM102014V1, Rev. G 3 PRODUCT DESCRIPTION 3.1 VOICE OPERATION 3.2 DATA OPERATION 3.3 REMOTE CONTROL HEAD OPERATION 3.4 INTERCOM OPERATION 3.5 V-TAC OPERATION 3.6 PERSONALITY 3.6.1 Profiles 3.6.2 Talk Groups 3.7 GPS OPTION 3.8 FRONT PANEL 3.9 M-803 REAR PANEL MM102014V1, Rev. G 3.10 CONTROL HEAD REAR PANEL 3.11 V-TAC REAR PANEL 4 BASIC OPERATION 4.1 FRONT PANEL COMPONENTS OVERVIEW Table 4-1: Front Panel Controls and Functions 4.2 DISPLAY OVERVIEW Page MM102014V1, Rev. G 4.2.5 Dwell Display MM102014V1, Rev. G Table 4-3: Basic Menu Structure 21 Use (up arrow) and (down arrow) to scroll through menus. 4.2.6 Menu Display and Control Area MM102014V1, Rev. G 4.2.7 Dwell Display User-Selectable 4.3 ADJUSTING DISPLAY & BUTTON BACKLIGHT BRIGHTNESS 4.4 STEALTH MODE 4.5 ADJUSTING SIDE TONE AUDIO LEVEL 4.6 CHANGE OPERATING MODE 5 BASIC OPERATION IN OTP MODE 5.1 TURNING THE RADIO ON 5.2 SELF-TEST 5.3 LOGGING IN TO THE NETWORK 5.4 LOGGING OFF THE NETWORK 5.5 TURNING THE RADIO OFF MM102014V1, Rev. G 5.6 RECEIVING AND TRANSMITTING VOICE CALLS 5.6.1 Receiving a Voice Call 5.6.2 Transmitting a Voice Call 5.7 RADIO TONES Page 5.8 ADJUSTING SPEAKER/HEADSET AUDIO TREBLE LEVEL 5.9 CHECKING OR CHANGING THE ACTIVE PROFILE 5.10 CHECKING OR CHANGING THE SELECTED TALK GROUP 5.11 INTERCOM MODE 5.12 TALK GROUP LOCK OUT MM102014V1, Rev. G 5.12.1 Locking Out a Talk Group 5.12.2 Unlocking a Talk Group MM102014V1, Rev. G 5.12.3 Caution Regarding Profile Changes 5.13 SCAN MODE MM102014V1, Rev. G 5.13.1 Checking or Changing Active Scan Mode MM102014V1, Rev. G 5.13.2 Changing Priority Talk Group 5.14 SELECTIVE CALL MM102014V1, Rev. G 5.14.1 Making a Selective Call 5.14.2 Receiving a Selective Call 5.15 SELECTIVE ALERT MM102014V1, Rev. G 5.15.1 Sending Selective Alert Messages MM102014V1, Rev. G 5.15.2 Receiving Selective Alert Messages 5.15.3 Defining Pre-Programmed Messages 5.16 TELEPHONE INTERCONNECT CALLS MM102014V1, Rev. G 5.17 EMERGENCY COMMUNICATIONS 5.17.1 Declaring an Emergency Call or Alert MM102014V1, Rev. G 5.17.2 Silent Emergency 5.17.3 Clearing an Emergency Call or Alert 5.17.4 Receiving an Emergency Call MM102014V1, Rev. G 5.17.5 Dismissing an Emergency Call 5.18 DUAL-TONE MULTI-FREQUENCY KEYPAD MM102014V1, Rev. G 5.18.1 Password Entry MM102014V1, Rev. G 5.18.2 DTMF Overdial 5.19 ENCRYPTION 5.19.1 Automatic Encryption 5.19.2 Manual Encryption 5.20 PRESET BUTTONS 5.21 DYNAMIC REGROUPING 5.22 GPS COORDINATES 5.23 V-TAC FUNCTIONS MM102014V1, Rev. G 5.23.1 Extended Coverage Modes (XCOV & XCOV-TG) Page MM102014V1, Rev. G 5.23.2 V-TAC GPS Interlock MM102014V1, Rev. G 5.23.3 Scene-Of-Incident Mode (SOI) MM102014V1, Rev. G 5.23.4 Mobile-Only Mode (Mobile) 5.23.5 Manually Changing V-TAC Mode 5.23.6 Displaying V-TAC Information MM102014V1, Rev. G 5.24 ENGINEERING DISPLAY 5.24.1 Voice and Data Registration Codes 5.24.2 Transceiver Status Page 5.25 RECEIVE SIGNAL STRENGTH INDICATION (RSSI) 5.26 CONTROL BLOCK SYMBOL ERROR RATE (CBSER) 6 BASIC OPERATION IN OCF MODE 6.1 TURNING THE RADIO ON 6.2 TURNING THE RADIO OFF 6.3 PRESET BUTTONS 6.4 SQUELCH 6.5 SELECT MONITOR MODE MM102014V1, Rev. G 6.5.1 Setting Monitor Mode 6.5.2 Duration of Monitor Mode Selections 6.6 GROUP CALLS IN P25 (DIGITAL) MODE 6.7 EMERGENCY GROUP CALLS IN P25 MODE 7 BASIC TROUBLESHOOTING Page 8 WARRANTY