Manuals / Brands / Home Audio / Radio / Tyco Electronics / Home Audio / Radio

Tyco Electronics MM102014V1 4.2.6 Menu Display and Control Area

1 64

Download 64 pages, 1.54 Mb

MM102014V1, Rev. G

Menus will vary depending upon system programming, radio hardware, and optional

configurations.

All menus except the dwell display menu can be turned off by network administration

personnel.

No V-TAC-related menus are displayed on non-V-TAC radios/control heads.

The “Vchan Menu” is only displayed if the V-TAC is in the SOI mode.

If a V-TAC is in an Extended Coverage mode (XCOV or XCOV-TG), the number of

portable radios (“clients”) connected to the V-TAC is displayed in the bottom line of the

dwell menu.

If a V-TAC is in the Extended Coverage for a Talk Group mode (XCOV-TG), the selected

talk group and profile in use is displayed.

Figure 4-3: Sample Top and Bottom Display Lines

4.2.6 Menu Display and Control Area

Following power-up, the radio display shows the default talk group. Pressing the c and d buttons

change the display to the next available menu. Refer to Table 4-3. In many cases, the dwell display

automatically re-appears after no menu buttons are pressed for a short period of time (between 10 and 30

seconds). For some menus such as the GPS Fix and User ID menus, this does not occur until the user

presses a front panel button.

When the dwell display is active, it will change dynamically to reflect the current profile, received talk

group/caller ID (when available), or channel (when enabled). V-TAC mode or V-TAC channel can be

displayed as well on V-TAC installations.

The radio’s display is highly interactive. It responds in the top and bottom text lines as the user presses

the menu buttons (c, d, ◄, ► and Select) to scroll through the menu loop and the entries for each

menu.

Although the radio display supports eight (8) characters on the top line, systems

currently limit talk group names to seven (7).

22

Contents

Main M-803 MM102014V1, Rev. G Page Page Page 1 REGULATORY AND SAFETY INFORMATION 2 SAFETY INFORMATION 2.1 OCCUPATIONAL SAFETY GUIDELINES AND SAFETY TRAINING INFORMATION 2.2 COMMON HAZARDS MM102014V1, Rev. G 3 PRODUCT DESCRIPTION 3.1 VOICE OPERATION 3.2 DATA OPERATION 3.3 REMOTE CONTROL HEAD OPERATION 3.4 INTERCOM OPERATION 3.5 V-TAC OPERATION 3.6 PERSONALITY 3.6.1 Profiles 3.6.2 Talk Groups 3.7 GPS OPTION 3.8 FRONT PANEL 3.9 M-803 REAR PANEL MM102014V1, Rev. G 3.10 CONTROL HEAD REAR PANEL 3.11 V-TAC REAR PANEL 4 BASIC OPERATION 4.1 FRONT PANEL COMPONENTS OVERVIEW Table 4-1: Front Panel Controls and Functions 4.2 DISPLAY OVERVIEW Page MM102014V1, Rev. G 4.2.5 Dwell Display MM102014V1, Rev. G Table 4-3: Basic Menu Structure 21 Use (up arrow) and (down arrow) to scroll through menus. 4.2.6 Menu Display and Control Area MM102014V1, Rev. G 4.2.7 Dwell Display User-Selectable 4.3 ADJUSTING DISPLAY & BUTTON BACKLIGHT BRIGHTNESS 4.4 STEALTH MODE 4.5 ADJUSTING SIDE TONE AUDIO LEVEL 4.6 CHANGE OPERATING MODE 5 BASIC OPERATION IN OTP MODE 5.1 TURNING THE RADIO ON 5.2 SELF-TEST 5.3 LOGGING IN TO THE NETWORK 5.4 LOGGING OFF THE NETWORK 5.5 TURNING THE RADIO OFF MM102014V1, Rev. G 5.6 RECEIVING AND TRANSMITTING VOICE CALLS 5.6.1 Receiving a Voice Call 5.6.2 Transmitting a Voice Call 5.7 RADIO TONES Page 5.8 ADJUSTING SPEAKER/HEADSET AUDIO TREBLE LEVEL 5.9 CHECKING OR CHANGING THE ACTIVE PROFILE 5.10 CHECKING OR CHANGING THE SELECTED TALK GROUP 5.11 INTERCOM MODE 5.12 TALK GROUP LOCK OUT MM102014V1, Rev. G 5.12.1 Locking Out a Talk Group 5.12.2 Unlocking a Talk Group MM102014V1, Rev. G 5.12.3 Caution Regarding Profile Changes 5.13 SCAN MODE MM102014V1, Rev. G 5.13.1 Checking or Changing Active Scan Mode MM102014V1, Rev. G 5.13.2 Changing Priority Talk Group 5.14 SELECTIVE CALL MM102014V1, Rev. G 5.14.1 Making a Selective Call 5.14.2 Receiving a Selective Call 5.15 SELECTIVE ALERT MM102014V1, Rev. G 5.15.1 Sending Selective Alert Messages MM102014V1, Rev. G 5.15.2 Receiving Selective Alert Messages 5.15.3 Defining Pre-Programmed Messages 5.16 TELEPHONE INTERCONNECT CALLS MM102014V1, Rev. G 5.17 EMERGENCY COMMUNICATIONS 5.17.1 Declaring an Emergency Call or Alert MM102014V1, Rev. G 5.17.2 Silent Emergency 5.17.3 Clearing an Emergency Call or Alert 5.17.4 Receiving an Emergency Call MM102014V1, Rev. G 5.17.5 Dismissing an Emergency Call 5.18 DUAL-TONE MULTI-FREQUENCY KEYPAD MM102014V1, Rev. G 5.18.1 Password Entry MM102014V1, Rev. G 5.18.2 DTMF Overdial 5.19 ENCRYPTION 5.19.1 Automatic Encryption 5.19.2 Manual Encryption 5.20 PRESET BUTTONS 5.21 DYNAMIC REGROUPING 5.22 GPS COORDINATES 5.23 V-TAC FUNCTIONS MM102014V1, Rev. G 5.23.1 Extended Coverage Modes (XCOV & XCOV-TG) Page MM102014V1, Rev. G 5.23.2 V-TAC GPS Interlock MM102014V1, Rev. G 5.23.3 Scene-Of-Incident Mode (SOI) MM102014V1, Rev. G 5.23.4 Mobile-Only Mode (Mobile) 5.23.5 Manually Changing V-TAC Mode 5.23.6 Displaying V-TAC Information MM102014V1, Rev. G 5.24 ENGINEERING DISPLAY 5.24.1 Voice and Data Registration Codes 5.24.2 Transceiver Status Page 5.25 RECEIVE SIGNAL STRENGTH INDICATION (RSSI) 5.26 CONTROL BLOCK SYMBOL ERROR RATE (CBSER) 6 BASIC OPERATION IN OCF MODE 6.1 TURNING THE RADIO ON 6.2 TURNING THE RADIO OFF 6.3 PRESET BUTTONS 6.4 SQUELCH 6.5 SELECT MONITOR MODE MM102014V1, Rev. G 6.5.1 Setting Monitor Mode 6.5.2 Duration of Monitor Mode Selections 6.6 GROUP CALLS IN P25 (DIGITAL) MODE 6.7 EMERGENCY GROUP CALLS IN P25 MODE 7 BASIC TROUBLESHOOTING Page 8 WARRANTY