Troubleshooting Guide

DANGER

ELECTROCUTION HAZARD

Never attempt to repair or perform maintenance on the unit until the main electrical power has been disconnected.

Troubleshooting - What to check when problems occur:

PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

 

Unit does not operate and

No electrical supply

Plug unit in or check circuit breaker.

electronic display is blank.

 

 

 

 

 

No interior light

Loose or burned out bulb

Tighten or replace bulb (See MAINTENANCE; LIGHT

 

 

BULB REPLACEMENT).

 

 

 

Electronic display is blank and

Unit is in blackout/Sabbath mode

Exit blackout/Sabbath mode (not Star K certified)

interior light is OFF with door OPEN.

(not Star K certified) lighting mode.

(See OPERATION; INTERIOR LIGHT CONTROL).

 

 

 

Electronic display is blank and

A display function has changed.

Touch and hold the warmer temperature button and

interior light is ON with door OPEN.

 

touch and release the POWER button three times, then

 

 

release the temperature button. The display should

 

 

become visible.

 

 

 

Electronic display shows repeating,

A factory control mode has been

Touch and hold the warmer temperature button and

randomly flashing symbols and

inadvertently entered.

touch and release the LIGHT button three times, then

partial characters.

 

release the temperature button to exit the factory

 

 

control mode. The set-point temperature should now

 

 

be displayed.

 

 

 

Electronic display shows:

A factory control mode has been

Repeatedly touch the warmer temperature button to

0, 1 to 26, or 99.

inadvertently entered.

advance any number shown to 99 and touch and

 

 

release the LIGHT button. The set-point temperature

 

 

should now be displayed.

 

 

 

Electronic display shows E3.

Door has been left open longer than

Close door completely. The set-point temperature

 

20 minutes.

should now be displayed.

 

 

 

Electronic display shows one or

The unit is displaying an error code.

Record the error code(s) displayed and call for service.

more of the following:

 

 

E1, E2, E4, E5, E6, E7, E8, E9, E10, P1.

 

 

 

 

 

Unit not cold enough. Check

Control set too warm

Set control to a cooler setting (See OPERATION). Allow

temperatures (See OPERATION for

 

24 hours for temperature to stabilize.

approximate temperatures).

 

 

Airflow to front grille blocked

Airflow must not be obstructed to front grille (See

 

 

 

OPERATION).

 

 

 

 

Dirty condenser coils

Clean condenser (See MAINTENANCE; CONDENSER

 

 

CLEANING).

 

 

 

 

Door gasket not sealing properly

Door adjustment required (See MAINTENANCE; DOOR

 

 

ALIGNMENT CHECK AND ADJUSTMENT).

 

 

 

 

Inaccurate temperature reading

Properly check temperature (See OPERATION).

 

 

 

Unit is too cold. Check temperatures

Control set too cold

Set control to a warmer setting (See OPERATION). Allow

(See OPERATION for approximate

 

24 hours for temperature to stabilize.

temperatures)

 

 

 

 

 

The unit frosts up.

High ambient temperatures or

Defrost unit manually (See MAINTENANCE;

 

humidity

DEFROSTING).

 

 

 

 

Door gasket not sealing

Adjust door (See MAINTENANCE; DOOR ALIGNMENT

 

 

AND ADJUSTMENT and DOOR REVERSAL).

 

 

 

20

2115WC and 2115WCOL, 2175WC and 2175WCOL

Page 20
Image 20
U-Line 2115WC manual Troubleshooting Guide, Troubleshooting What to check when problems occur

2115WC specifications

The U-Line 2115WC is a compact wine cooler designed to accommodate the needs of wine enthusiasts, providing a perfect blend of style, functionality, and technology. This model stands out for its ability to store a wide variety of wine types in an optimal environment, ensuring the preservation of flavors and aromas.

One of the key features of the U-Line 2115WC is its capacity to hold up to 30 wine bottles. The unit is equipped with adjustable shelves, allowing for flexible storage solutions to cater to different bottle sizes, including standard Bordeaux, Burgundy, and sparkling wines. The shelves are designed for both durability and ease of access while minimizing vibration that may disturb the wine.

The temperature control system is another highlight of the U-Line 2115WC, featuring a digital touch control interface that makes it simple to set and monitor the internal temperature. The unit has two separate temperature zones, enabling users to store different types of wine at their respective ideal temperatures. The upper zone typically ranges from 40°F to 55°F, making it suitable for sparkling and white wines, while the lower zone can be set between 50°F to 65°F for red wines.

In terms of design, the U-Line 2115WC features a sleek and modern aesthetic. The unit includes a glass door with a stainless-steel frame, providing a clear view of the stored bottles while offering UV protection to shield the wine from harmful light exposure. Additionally, the built-in LED lighting elegantly illuminates the interior, enhancing visibility without generating excessive heat.

The U-Line 2115WC also incorporates advanced cooling technology, utilizing a forced-air refrigeration system to maintain a consistent temperature throughout the cabinet. This method not only enhances temperature stability but also promotes humidity control, which is crucial for cork preservation.

For those who value energy efficiency, this wine cooler boasts an environmentally friendly design with Energy Star certification, ensuring that it operates with minimal energy consumption.

In conclusion, the U-Line 2115WC is an impressive wine cooler that caters to the needs of serious wine collectors and casual enthusiasts alike. With its ample storage capacity, dual temperature zones, sophisticated design, and advanced cooling technologies, it provides an ideal solution for preserving and displaying a curated selection of wines.