PC/Mac Connection

As is already mentioned, iZak™ automatically operates as an external USB-2 hard disk of 80GB or 40GB data storage (depending on the model) when connected to a PC or Macintosh.. Your system will automatically recognize iZak™ as an external hard disk in which you can copy any file(s) you want (music, movie, picture, and data).

Important:

•Always use the included USB2 cable to connect your iZak™ to your computer. Use of other cables may affect efficient operation.

•Always connect the iZak™ directly to one USB2 port of your computer, not via hubs.

•Always “Empty Recycle Bin” after deletion of file(s) on your iZak™ to actually free the HDD space.

iZak™ supports all file formats: FAT32 (Windows 98SE, Windows Me, Mac) NTFS (Windows 2000, Windows XP), HFS+ (Mac) with up to 480 Mbps transfer rate (in USB-2 connections). Please notice that if your host system does not have a USB2 interface, but only USB 1.1, then you will receive under Windows XP, the message in the adjacent figure, issuing a relevant warning.

iZak™ as an external USB2 hard disk device can be connected to a variety of Operating Systems supporting the USB interface:

•Windows Me/2000/XP

•Mac OS9, OSX

(All the captures and examples in this section have been taken from a Windows XP system).

Please notice that you don’t need external power adaptor because iZak™ is powered by the USB bus power.

iZak™ is provided to you with preformatted hard disk (NTFS) and default directory structure as shown in the adjacent snap-shot:

iZak™ User Guide

PC or Mac

USB

Cable

iZak

15