iZak™ User Guide

Safety Information

Before starting enjoying your iZak™ please read carefully the following paragraphs related on the safety issues of your device, in order to extend its life.

Power on/off precautions

iZak™ Remote Control provides the POWER ON/OFF button that controls the power status of your device. It is highly recommended to switch the unit to standby mode (yellow light) when it is not in use. In any case iZak™ will switch to stand-by mode, if idle for more than 30 minutes.

Switching iZak™ to stand-by, the TV indication led becomes from GREEN to YELLOW, the HDD is in stand-by mode and the entire system consumes less power. Consequently less heat is produced and much less mechanical stress to the HDD. All the above factors,

guarantee longer life for your iZak™ device.

Location and placing precautions

Set the iZak™ unit up in a horizontal position and DO NOT place heavy objects on top of it. Do not place any other objects on top of the unit. Do not place the unit on an amplifier or other equipment that can become hot. Do not open in any case the device.

Avoid locating your iZak™ device in the following places:

•Locations with direct sunlight, next to radiators or other sources of heat or in vehicles, which are parked directly in the sun with the windows and doors closed.

•Locations with very high temperature (more than 35° C) or humidity (more than 90%).

•Very dusty or sandy locations.

•Locations subject to vibration or shock or with a sloping base

39