iZak™ User Guide
Screen Saver
Select the time interval to enable the screen saver, when your iZak™ device is idle.
As you can see there are three (3) predefined time intervals of 5, 10 and 30 minutes, or you can disable the screen saver.
Use the ▲▼ navigation buttons to select your setting. Press the HOME button of the remote to save the settings.
Firmware Update
This setting performs the firmware update procedure by reading the firmware binary files located in the “Firmware” directory of you device.
Never delete or rename this folder.
Provided that you already have copied to this directory the latest firmware files that you downloaded from the official site of Unibrain:
http://www.unibrain.com/1394_products/iZak/iZak_Firmware_Update.htm
press enter to choose the start of the process. You can verify from the menu the revision number of the installed version and the revision of the new release.
The firmware update procedure takes approximately 1 minute and once completed, turn of your device, by removing the power supply and turn it on after a few seconds. The new firmware will start operating in your device.
IMPORTANT NOTE: NEVER TURN OFF iZak™ DURING THE FIRMWARE UPDATE PROCEDURE. THIS MAY DAMAGE YOUR DEVICE. IF FOR ANY REASON (E.G. POWER SUPPLY FAILURE DURING FIRMWARE UPDATE) THE PROCEDURE FAILS, YOU MAY NOT BE ABLE TO OPERATE YOUR DEVICE. IN THIS CASE YOUR DEVICE MAY BE REPLACED WITH A FUNCTIONAL UNIT BY UNIBRAIN.
To return to factory default setting press consecutively: INFO, 0, 1, 2, ENTER/PLAY
30