Uniden 7000A manual Troubleshooting, If all of the above suggestions do not resolve, Machine

TROUBLESHOOTING

TROUBLESHOOTING	PROBLEM	SUGGESTION
	Clock loses time.	• The power to the base unit has been
	Cannot access remote call-in features from	• Make sure you’re using the correct PIN
	another touch-tone phone.	number.
		• Make sure that the touch-tone phone
		you’re using can transmit the tone for at
		least two seconds. If it cannot, you may
		have to change to another phone.
		interrupted. Reset the clock as detailed
		on page (19) of this owners manual.
	Message counter LED flashes	• Follow the instructions on page (16).
	(Battery low or not fitted)	Be sure to leave the AC Adaptor connected
		so you do not loose the stored information.
	Answering system switches on after 9 rings,	• The unit is waiting for your PIN number so
	beeps once, then disconnects after 8 seconds	you can clear message from a remote
		location. Refer to page 33 for more details.
	RESETTING THE DTAM
	If all of the above suggestions do not resolve
	your problem, use a straightened paper
	clip to press RESET on the back of
	the DTAM to reset the answering
	machine.

NOTE:	Resetting the DTAM erases your outgoing messages and all stored
	information.

Disconnect the telephone line cord before operating the

RESET switch.

38