REMOTE OPERATION
REMOTE OPERATION
CHANGING THE REMOTE OPERATION SECURITY CODE The remote operation security code is preset to 798, but you can change it by following these steps.
1.Hold down code set until the DTAM beeps once. 
appears.
2.Press
again. 
(security code) and the digits of the current code appear in sequence, then the first digit reappears. For example, when the security code is 798, the display shows
(security code) | , | , | , then | reappears. |
3.Repeatedly press 
or 
to set the first digit, then
press 
. The second digit appears.
4.Press 
or 
to set the second digit, then press
The third digit appears.
5.Press 
or 
to set the third digit, then press 
The DTAM sounds a long beep and announces the security code.
NOTE: | Be sure to set each digit within 8 seconds. Otherwise, you must start | |||
|
|
|
| over from Step 1. |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
|
34
