PREPARATION

SETTING THE DAY AND TIME

The DTAM records the day and time of the call with each phone message. Follow these steps to set the current day and time.

NOTE: • Adjust Volume Slider on the right side of the DTAM to the desired listening level.

If you do not complete each step within 8 seconds, the DTAM sounds four beeps, you must then start again from Step 1.

To avoid having to reset the time if AC power is lost, we recommend you install a backup battery before you set the day and time.

1.Hold down time set . (clock)

displays briefly then

(the day of the week) appears on the display, the DTAM announces "Sunday".

2.To change the day of the week, repeatedly press to

move forward or to move backward until the DTAM announces the desired day of the week.

3.Press time set The DTAM announces the preset hour.

4.To change the hour, repeatedly press to move

forward or to move backward to the desired hour.

5.Press time set The DTAM announces the preset minute.

6.To change the minutes, hold down to move

forward or to move backward to the desired minute.

7. Press time set to confirm the settings,

appears.

The DTAM announces the day and time then beeps.

 

disappears.

To check the current day/time at any time, press

 

 

set

time

PREPARATION

18

19

Page 10
Image 10
Uniden 7100A manual Preparation, Setting the DAY and Time, Hold down time set . clock Displays briefly then