Uniden 7100A manual Basic, To replay a message while you are listening to it, press, Fast Playback

BASIC OPERATION

To replay a message while you are listening to it, press .

OPERATION	The current message starts again from the beginning.
	To return to the previous message during playback, press and hold
BASIC	down	The previous recorded message plays.
	To skip to the next message during playback, press		once.

The next recorded message plays.

PAUSE MESSAGE PLAYBACK

To pause while listening to messages, press (pause)

appears on the display. To resume playback, press again within 60 seconds. Otherwise, the DTAM beeps once, stops playback, announces "End of message(s)" and displays the total number of messages.

BASIC OPERATION

FAST PLAYBACK

During message playback, press and keep holding , the message playback speed increases. This lets you quickly scan a message or move to any place within a message. To resume to

normal playback, release .

To stop playback at any time, press the .

The DTAM beeps and resets to answer calls.

DELETING MESSAGES

To delete a specific message, press delete once while the message is playing. The DTAM beeps once and deletes the current message, then plays the next.

To delete all messages, hold down delete when playback has

finished. appears, the DTAM announces "Erase message(s)", then sounds a long beep.

NOTE:	The DTAM does not delete messages that have not been played to the
	end. If you have messages that have not been played, the DTAM
	sounds four beeps.

BASIC OPERATION

28 29