Troubleshooting
If your BC45XLT is not performing properly, try the following steps.
Problem |
| Suggestion |
Scanner won’t work. | • | Check the batteries and replace |
|
| them if necessary. |
Improper reception. | • | Check the antenna connection or |
| • | reposition the antenna. |
| Move the scanner. | |
| • You may be in a remote area which | |
|
| could require an optional |
|
| antenna. Check with your dealer or |
|
| local electronics store. |
Scan won’t stop. | • | Check that the squelch is ON. |
| • Check the antenna connection. | |
| • Check to see if many of the channels | |
|
| are locked out. If so, the scanner has |
|
| less chance of finding an active |
|
| channel. |
| • Review each channel’s frequency to | |
|
| see if it is still stored in memory and |
|
| is correct. |
| • It is possible that none of the | |
|
| programmed frequencies are currently |
|
| active. |
Scan won’t start. | • Press the | key again. |
•Check that the squelch is ON.
•Check to see if all channels are locked out.
Weather Scan won’t | • | Check that the squelch is ON. |
work. | • | Check the antenna. |
If you still cannot get satisfactory results and want additional information, or to return the unit for service, please call or write the Uniden Customer Service.
The address and phone number are listed in the Warranty at the end of this manual, or call
27
