BCT8 8/13/03 5:13 PM Page 16
Highway Patrol Scanning
Highway Patrol frequencies are
Selecting the State
1.Press STATE to select the state you are operating in. Press and hold STATE to scroll rapidly.
Hint: For the State Cord Order, please see page 56.
2. To step forward through the states (A - W), press STATE and, within three seconds, press the ▲ key repeatedly. To step backward through the states (W - A), press STATE and, within three seconds, press the ▼ key repeatedly.
3. To scroll rapidly, press and hold the ▲ or ▼ key.
Scanning Highway Patrol Frequency
You can scan Highway Patrol frequencies and/or
1. Press PVT/HWY repeatedly until “HWY” appears on the display to scan through
2. Press PVT/HWY repeatedly until “PVT” appears on the display to scan through
Note: You must program a frequency into at least one channel before the Private bank scanning.
3. Press PVT/HWY repeatedly until “HWY” and “PVT” appears on the display to scan through Highway Patrol frequencies and User Programmed channels continuously.
Note: Priority Scanning is disabled. When both “HWY” and “PVT” are in operation. “PRI” will remain on the display.
4. When the scanner receives communications, scanning stops, the state code and the frequency displays.
When the transmission ends, the scanner holds for two seconds on that frequency for a response. For more information on Delay feature, please see page 28.
If there is no response, scanning resumes.
16
