Uniden BCT8 manual Band Search, Setting a Search Band

BCT8 8/13/03 5:14 PM Page 26

Band Search

Setting a Search Band

The BCT8 can search up to 13 separate frequency ranges to help you discover new stations in your area.

To set a Search Bands, enter into the Band Search mode.

Band	Frequncy Range (MHz)		Mode	Step	Display
1	25.0000	- 27.9950	AM	5kHz	25-28
2	28.0000	- 29.7000	FM	5kHz	28-30
3	30.0000	- 49.9950	FM	5kHz	30-50
4	50.0000	- 54.0000	FM	5kHz	50-54
5	108.0000	- 136.9875	AM	12.5kHz	108-137
6	137.0000	- 143.9950	FM	5kHz	137-144
7	144.0000	- 147.9950	FM	5kHz	144-148
8	148.0000	- 174.0000	FM	5kHz	148-174
9	400.0000	- 419.9875	FM	12.5kHz	400-420
10	420.0000	- 449.9875	FM	12.5kHz	420-450
11	450.0000	- 469.9875	FM	12.5kHz	450-470
12	470.0000	- 512.0000	FM	12.5kHz	470-512
	806.0000	- 826.9875
13	849.0125	- 868.9875	FM	12.5kHz	806-956
	894.0125	- 956.0000

1.Press SRCH. The upper and lower limits of the Bands currently selected are on the display.

2.Use the ▲ or ▼ key to select the band you want to search. Wait for about two seconds and the scanner will begin

searching that band. Or press HOLD/RESUME to begin immediately.

Note: • You must set the Search Bands prior to any searching.

•The scanner automatically increases its search speed up to 300 steps per second for bands having 5 kHz steps. (Turbo Search)

•While searching, you can change the search direction by using the ▲ or ▼ key. Make sure which of icon, “▲SRCH” or “SRCH▼” appears on the display.

26