Uniden D1789-11 Accessing the Answering System, Personalizing the Greeting, Follow these steps

Personalizing the Greeting

Your personal outgoing message or greeting can be from 2 to 30 seconds long. If you don’t record a greeting, the system uses a pre-recorded greeting: Hello, no one is available to take your call. Please leave a message after the tone.

To...	Follow these steps:
	1.	Open the menu with the phone in standby. Select Answering Setup,
		then Record Greeting.
	2.	Press SELECT on the base or Menu/Select on the cordless handset to
		start recording. Wait until the system says "Record greeting" before
record a		speaking.
	3.	Press SELECT on the base or Menu/Select on the cordless handset to stop
personal
		recording. The system plays back your new greeting.
greeting
	4.	To keep the greeting, press PLAY/STOP on the base or End on the
		handset. To delete it and try again, press CLEAR/FLASH on the base or
		Intercom/Clear on the handset.
	##Recording a greeting overwrites any previously recorded
		greetings.
	1.	Open the menu with the phone in standby. Select Answering Setup,
switch		then Greeting Options.
between	2. The system plays back the current greeting. Press select on the
greetings		base or Menu/Select on the cordless handset to switch between the
		prerecorded greeting and the personal greeting.
delete your	Switch to your personal greeting, then press CLEAR/FLASH on the base or
greeting	Intercom/Clear on the handset.

Accessing the Answering System	Press MESSAGE/MUTE to start
	remote operation mode.
When the phone’s in standby, you can access the answering	1:Repeat	3:Skip
system from any handset; however, only 1 station can access	4:Delete	5:Stop
the answering system at a time.
• After 30 seconds of inactivity, it returns to standby.		Press a correspond-
		ing number key to
• During remote access, the phone beeps so you know it’s		choose an operation
		OR
		END to exit remote
waiting for the next command.		operation mode.

•During message playback, press MENU/SELECT to open the menu for playback control. You can press the number key

shown next to each command instead of scrolling through the screens.

To...	From the base	From a handset
	Press Play/stop.	Press Message/mute and
		select Play Message.
play new	The system announces the date, time, and the number of new and
messages
	old messages before playing each new message in the order it was
	received. After the new messages play, the system plays the old
	messages.

English - 21