Programming a Security Code
With the phone in standby, open the menu; select Ans. Setup, then select Security Code. Use the number keypad to enter a
##Remember to make a note of your new security code! Dialing In to Your System
1.Call your phone number & wait until the system answers. (If the system is turned off, it answers after 10 rings & sounds a series of beeps.)
2.During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby.
3.The system announces the time, the number
of messages in memory, and a help prompt. It beeps to let you know it's waiting for a command.
4.When you hear beeping, enter a
01 | Repeat message | 05 | Stop playback |
02 | Play message | 06 | Turn the system on |
03 | Skip message | 09 | Turn the system off |
04 | Delete message | 10 | Hear help prompts |
##If you don't press any keys for 15 seconds, the system hangs up and return to standby.
Important Information
Solving Problems
If you have any trouble with your phone, check this section first. If you need help, call our Customer Care Line listed on the front cover.
General problems | Possible solutions | |
No handsets can | xxCheck the telephone cord connection. | |
xxDisconnect the base AC adapter for a few | ||
make or receive calls. | ||
minutes; then reconnect it. | ||
|
English - 17
