14 - English
To change the volume of CID announcements, change the ringer volume.
To change the volume for all
Caller Announce
features, change the speaker
volume.
To make sure it doesn't interrupt a call or an intercom page, the phone only
uses Caller Announce when it starts out in standby.
It takes at least 2 rings for the phone to receive CID information and announce
it. If the phone is answered before the end of the second ring, the phone won't
announce the name of the caller.
The Caller Announce feature only uses English, regardless of the language for
the display or the answering system prompts.

Setting Caller Announce

1. Press MENU/OK and scroll to
Handset Setup
. Press MENU/OK to select it.
2. Scroll to
Caller Announce
; press MENU/OK to select it.
3. Select
ON
or
Off
and then press MENU/OK to select it
Call Blocking
If you subscribe to Caller ID, you can save phone numbers to the call block list.
When a call comes in, the phone compares the received phone number to the
numbers on the call block list. If the phone number is on the list, the phone
replaces the caller's name with
Call Blocked
and blocks the call.
The call block list holds 30 entries, and all handsets share the same list. You can
add entries by selecting
Add Call Block
in the CID menu that displays after you have
viewed the CID record or through the
Call Blocking
menu (see below). (Only one
handset can edit the call block list at a time.)

Call Blocking Menu Options

With the phone in standby, open the menu and select
Call Blocking
. Choose one of
these options:
Menu Option What it does
View Number
See the numbers on your call block list.
Create New
Add an entry to your call block list. The phone will prompt
you to enter a name & phone number.
Private Number
Block all calls from numbers reported by CID as "Private."
(This does not count as one of the 30 entries.)
Unknown Number
Block all calls from numbers reported by CID as "Unknown."
(This does not count as one of the 30 entries.)

Call Blocking Entry Options

With the phone in standby, open the menu, select
Call Blocking
then
View Number
;
scroll through the entries. Press MENU/OK to open the individual entry. Choose one
of these options: