English - 17
If... Then...
the handset and base are connected
(intercom call) and no signal from
the base
the handset sounds an error tone and Out
of Range displays.
the handset is in Talk mode and
moves out of range
the outside line is put on Hold for 30
seconds and then dropped. The LCD
alternately displays Out of Range and
Check Base Power.
the handset and base are in standby
mode and the handset does not get
a signal from the base for 5 seconds
the LCD alternately displays Out of Range
and Check Base Power.
audio deteriorates
the handset sounds an error tone. The
LCD alternately displays End of Range and
Move toward base.
you are trying to go off-hook
call data displays and then an error tone
sounds. The LCD alternately displays Out
of Range and Check Base Power.
you are trying to go on-hook Talk mode continues for 5 seconds and
then END displays.
USING THE ANSWERING SYSTEM

Answering System Options (

Answering Setup

)

You can change the answering system options from any handset. Just open the
menu and select
Answering Setup
.
Menu Option What it does
Security Code
Enter a 2-digit PIN so you can access your answering system
from any touch-tone phone (see page 20).
Ring Time
Set the number of rings (
2
,
4
, or
6
) before the system answers
(see page 20 about
Toll Saver
).
Record Time
Set the amount of time (
1
or
4
minutes) callers can leave a
message. Choose
Announce Only
if you don't want the system
to let callers leave a message.
Message Alert
Have the base beep every 15 seconds when you have a new
message. The alert stops after you listen to all your new
messages or if you press any key on the base.
Answer Language
Change the language of the system's voice prompts.
Call Screen
Turn on the call screen feature so you can hear callers as they
leave messages on the base speaker (see page 20).