Uniden D3097 Using Multi-Handset Features #

English - 15

Choose this... To...

Edit

Edit this entry. The phone will prompt you to edit the name &

phone number.

Delete

Erase this entry from the list & allow calls from this number.

With the phone in standby, open the menu, select

Call Blocking,

then

Create New

Enter the name and number to be blocked. Press MENU/OK to save the entry

Using Multi-Handset Features

#To use the features in this section, you need at least 2 handsets.

Your base supports a total of 12 cordless handsets, including any that came

with your phone.

You must register accessory handsets to the base before using them. Handsets

that aren’t registered display a "not registered" message. For registration

instructions, see page 23 or the accessory handset manual.

When an outside call comes in, two handsets can join in a conference call with

the outside caller.

To join the call, just press TALK/FLASH. To leave the conference call, hang up

normally; the other handset remains connected to the call.

To activate Privacy Mode on a call in progress, press MENU/OK twice. As long as

privacy mode is on, no other handsets can join your call.

Privacy Mode turns off automatically when you hang up or put the call on hold;

you can also turn it off by pressing MENU/OK twice again.

To... Press...

transfer a call

Select

Hold/Transfer

from the off-hook menus. The

system puts the call on hold and prompts you to select

all handsets or a specific handset to page. When the

other handset accepts the page, you'll be connected in an

intercom call. Press TALK/FLASH to transfer the outside call

to the other handset.

cancel a transfer TALK/FLASH to return to the call.

accept a transferred

call

TALK/FLASH to answer the page and speak to the other

handset. Then, press TALK/FLASH to speak to the caller.