♦♦ If an outside call comes in during an intercom call, press Home/Flash or CELL, depending on which line is ringing, to hang up the intercom call and answer the outside call.
To... | Press... |
make an intercom page | Intercom/Clear. Select the handset you want to talk |
with, or ALL to page all handsets at the same time. | |
cancel a page | End. |
answer a page | Intercom/Clear or Home/Flash. |
end an intercom call | END. Both handsets return to standby. |
Chain Dialing
If you often have to enter a series of digits or a code number during a call, you can save that code number to a phonebook entry and use the phonebook to send the code number.
1.Enter the code number (up to 32 digits) into the phonebook just like a regular phonebook entry. Be sure to enter the code number into the phonebook exactly as you would enter it during a call.
2.When you hear the prompt that tells you to enter the number, open the phonebook and find the entry that contains your code number.
3.Press Menu/select twice to send the code. If you change your mind, just close the phonebook.
Voice Message Notification
If you subscribe to a land line’s voice mail service, your phone can notify you when you have a new message. This feature supports
When you have new messages, the display shows a message icon. To access your voice mail, press Message/mute and select Voice Mail.
##When you select Voice Mail, you will be prompted to enter a Voice Mail
Access number if you have not yet set one up (see page 10). If you have already set one up, your phone will dial it.
After you listen to your messages, the message icon turns off. If it doesn’t, you can reset it: With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes.
If you change voice mail providers, you can edit your voice mail number. Open the menu and select Global Setup/Edit Voice Mail.
English - 19
