To... | From the base | From a handset | |
delete a | While a message is playing, press | While a message is | |
playing, select 4 (number | |||
message | Delete. | ||
key). | |||
|
| ||
|
|
| |
delete all | With the phone in standby, press | Not available. | |
messages | Delete; press Delete again to confirm. | ||
| |||
|
|
| |
play old | After the system plays all new messages, | ||
messages | press Play/stop again. | select 2 (number key). | |
|
|
| |
stop playback | Press Play/stop. | Select 5 (number key). | |
|
|
| |
Screening Your Calls
You can use the answering system for call screening. While the system takes a message, you can listen on the base speaker (if you turn on Call Screen) or from a handset. Only one handset can screen calls at a time. If another handset tries to screen calls, it beeps and returns to standby.
To... | From the base | From a handset | |
hear the caller leaving a | Listen to the caller over | Press Message/mute. | |
message | the speaker. | ||
| |||
answer the call | NA | Press HOME/flash. | |
mute the call screen | Press Play/stop. | Press End or return the | |
without answering* | handset to the cradle. | ||
|
*If you mute the call screen, the system continues taking the message: it just stops playing through the speaker.
Using the System While You're Away from Home
You can dial in to your answering system from any
Programming a Security Code
With the phone in standby, open the menu; select Answering Setup, then select Security Code. Use the number keypad to enter a
##Remember to make a note of your new security code!
Dialing In to Your System
1.Call your phone number & wait until the system answers. (If the system is turned off, it answers after 10 rings & sounds a series of beeps.)
2.During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby.
22 - English
